1/8 Of A Mile

[FASTGEORGE1]

MY BANSHEE IS 80 OVER STOCK CRANK WELDED, 34 MM CARBS,

V-FORCE REEDS, 200 PDS COMPRESSION, TIMMING PLATE, RACE

GAS 110, OVER RIDE TRANSMISSION, SET OF SLICKS AND MY TIME

WAS 7.09 AT 91 MPH.

 

I DO MY OWN WORK, PORTING, TUNING AND DRIVING.

[98modifiedblaster and 97banshee]

good time!!! last summer i took mine though the 1/8 and i ran a 8.71 at 76mph. i just got my cylinders ported polished and bored 20 over so i am sorta wondering how it will run this time but i gotta wait till the spring...Matt

[cb67rs1]

hey fastgeorge, what kindof port job do you have? i am tryign to get my compression up. i am running 18cc domes with the grr pro port and i only have about 150 psi on compression. i am thinking of going with 17cc domes. im lookign to get my bike down in the low 12's this coming summer in the 1/4.

[NYUK]

I HAVE A 2002 BANSHEE WITH A WELDED STOCK CRANK BORED 20 OVER WITH

17CC STOCK HEAD, PORTING BY ME , 34MM MIKUNIS ,VFORCE REEDS, TIMMING

AT + 10 with 100 OCTANE GAS, BARNETT CLUTCH, CPI INFRAMES AND 17,41.

1/4 I RUN 103 MPH

1/8 I RAN 7.49 AT 88.40

TOP END 105MPH.

 

1-786-299-7445 FAST GEORGE.

 

which was it george?

[cb67rs1]

I REALLY DO MY OWN , I PLAY WITH THE EXAUST PORT AND TRANSFERS  AND A COMBINATION OF SPROCKETS,TIMMING

AND JETS,  OF COURSE THE BIKE WAS LOWERED ABOUT 3 INCHES

OF THE GROUND SO IT WOULDN'T DO WILLIES;

I USE REGULAR STOCK TIRES 85% WAISTED.

MY 1/4 MILE TIME WAS 11.70 AT 102.85 MPH.

 

 

 

he is full of shit, this is what he pmed me