cb67rs1

o man it would be bad ass but has 2 raptor 660 or grizzly 660 or rhino motor lol

anyone have a motor for a rhino 660? i need one

here is the new one http://cgi.ebay.com/ebaymotors/ws/eBayISAP...6679&rd=1,1

actually didnt realize i did i went to ebay motors and atv hell they have changed so much stuff since the last time i listed one

guess i put it in the wrong category or something and ebay removed it i will repost tonight

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=330146044059

i have sime +2 +1 a arms looking to trade back for some good stockers tie rod go with them so i need tie rods too and also would like to have some stock front shocks if i can find a pic on here of my bike i will post what the arms look like

Trade ya a Bad ass banshee for it

Damn i figured someone would have snagged this on up quick, owell guess shes a keeper!

naaa not parting stuff out everything i have goes with the bike

Hey guys i dont wanna go no lower than 4 grand on this bike , the only reason i told john i would go 3500 for him is that he has gave me alot of shit in the past and has helped me out with it, it has lots of goodys and is a fast bike, i have poored a ton of money into it not to mention what was allready done to it, i am by no means in a bind and needing to sell it or am i trying to be an ass, i just never fool with it any more, maybe one day i will get back into it if it doesnt sell.

Let me sleep on that one john i may go 3500 cash it does need some clutches

banshee has grr pro port , 38 mm tmx carbs, cool head, trued and welded crank, v force reeds, GRR Drag pipes not the ones showed in the pic, currently i have a 8 inch swing arm on it from grr, this bike can be ridden in dirt too, i have all the shocks to go back on it, works triples with remote rezzies on the front stock rear shock, i also have a chrome +4 swinger to go with it and a set of fmf sst pipes and a set of razor 2 rear with re enforced rims and hole shot fronts. will take 4 grand for this jewel im located in louisiana pm me if you are interested or send an email to [email protected]

Hey . thanks for the good words man!

PMed u guys

2800 takes it now come and get it!!!!!!!!!!!!!!!!

Thanks again guys if all goes well i should be up and running in about 3 months, i will let you guys in on the progress as i am goin along, i will pretty much be able to do anything, my ovens are 10X10X25 as well as the sand blaster and spray booth, i should be able to do the banshee frames for you guys for like 75 bucks blasted and PCed ( thats regular colors). i will let you guys know

Thanks brooke, hopefuly i can get something just like www.superiorpowdercoating.com, i am so excited, going to build a new building with all new equipment, its going to be a 12000 sq ft building for now and will go bigger if need be!

Well guys and galls just wanted to write in and let you all know that i just got approved to start my business!! This morning started out at my job and our data base crashed and i lost a shit load of invoices and stuff, then the day keep on like a 48 hour monday that was never going to stop, i really though today would be the last day of my life, it was soo shitty. Well about 4:30 i get a call saying that i have been approved to start my own Powder Coating business, i do it on a small note and wanted to go huge, well after months and months and you can add a year or two if you want, i finally got the cash to go ahead and do it. what a pain in the ass it is to build a business plan and do all that and when you asking for over seven didgets in cash not everyone wants to give it to you. Anyways Brooke i will be getting with ya soon on a website and so you guys know the name of the business will be Superior Powder Coating. i will have a web site once we get up and running as long as brooke helps out and will hook you guys up on some PC stuff.

Dude that is a kick ass bike, but if you have no clue what a over ride tranny is its prolly focked by now! you will be tearing it down soon

Happy late b day John my man

Damn stan your the man!!! but it will be Clints Powder Coating, Fish and Shrimp! if i had a key code for auto cad 2004 i could do it myself, i have the program just not the key code

Well the dream of opening a large powder coating business is finally going to happen, man what a long hard road to get everything together, anyways is there anyone here that is a draftsman or draftswoman that if i can give a simple floor plan of what i want can draw me up a building?

Man stan that sucks, all i have to sy if my wife wants to leave me she can carry her ass, but the bad thing is she is pregnant right now and she WILL NOT get my kid or my dogs! F HER STAN PARTY ON!!!! your friends will always be here for you we want leave you like that!

Man i cant win for losing someone took the cowgirl stan made me, that makes me madder than a one legged waitress at IHOP! Im about to have to put my foot down!