Ayesully810 Posted January 23, 2020 Report Posted January 23, 2020 3 minutes ago, trumanbuckley1 said: Unless this guy is your friend and he’s just giving you the piss, don’t sell it. There is absolutely nothing wrong with asking any and every question! Sent from my iPhone using Tapatalk it would be much better to port the domes Quote
DoubleJay Posted January 24, 2020 Author Report Posted January 24, 2020 I don’t Know who that chick is . I hope she’s hot though. After I fix the banshee up , I’d sell it to her for $6500 Quote
Deets Posted January 24, 2020 Report Posted January 24, 2020 If the pistons are scored then it needs to come apart either way. The cylinders may clean up, but I’d definitely get some new slugs Quote
DoubleJay Posted January 24, 2020 Author Report Posted January 24, 2020 Waiting for my Clymer manual to arrive . Tried to do a search on this but can’t get an answer. How much stuff do I need to take off bike for top end change .. fuel tank , plastics, pipes stuff like that ??? Quote
trumanbuckley1 Posted January 24, 2020 Report Posted January 24, 2020 Waiting for my Clymer manual to arrive . Tried to do a search on this but can’t get an answer. How much stuff do I need to take off bike for top end change .. fuel tank , plastics, pipes stuff like that ???I find it’s easiest to remove all plastics and the fuel tank. I assume some people pull the motor but I did mine while it was still in the bike and it wasn’t bad at allSent from my iPhone using Tapatalk Quote
DoubleJay Posted January 24, 2020 Author Report Posted January 24, 2020 Ok thanks for response 1 Quote
DoubleJay Posted January 24, 2020 Author Report Posted January 24, 2020 Got it apart. Little bit of rust in left side of engine and in jug Quote
DoubleJay Posted January 24, 2020 Author Report Posted January 24, 2020 Left dome messed up too Quote
trumanbuckley1 Posted January 25, 2020 Report Posted January 25, 2020 Left dome messed up tooPost a bunch more picsSent from my iPhone using Tapatalk Quote
DoubleJay Posted January 25, 2020 Author Report Posted January 25, 2020 I’m hoping bottom end is ok. Cylinder walls are not damaged . Maybe I can re use jugs. Is head too far gone? Pistons are marked WSM... guessing that means wiseco??? Quote
trumanbuckley1 Posted January 25, 2020 Report Posted January 25, 2020 I’m hoping bottom end is ok. Cylinder walls are not damaged . Maybe I can re use jugs. Is head too far gone? Pistons are marked WSM... guessing that means wiseco???Not to be mean but is your camera smudged? Pics are kind of blurry. Just looking at the head, mine looked similar and I reused it. I took a hammer and punch and made sure to peen it all smooth again and knock off any loose chunks. Do your rods have any side to side play? Like angular side to side play. Any numbers on the pistons? There should be numbers on the tops that say what the bore is.Sent from my iPhone using Tapatalk Quote
DoubleJay Posted January 25, 2020 Author Report Posted January 25, 2020 Rods are good . Slight side to side play but no angular or up and down. Pistons are 50-520-07P 1.00 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.