KwikShee Posted May 30, 2019 Report Posted May 30, 2019 Hey guys I know this subject has been beat into the ground. I'm gonna be buying a crank next month and I'm trying to choose between an OEM or a Hot Rods. Whichever one will be trued and welded before install but just wanted some opinions on which one. This is gonna be a stock stroke crank as my jugs are ported for stock stroke and I already have the new pistons from when they were bored and ported. Mods are bored .040 with an aggressive trail port, cool head with 20 cc domes, timing plate, lightened flywheel, billet intake, 34 flat slides , K&N pods, FMF fattys . Pretty much it for engine mods, nothing too crazy. Quote
gusto Posted May 30, 2019 Report Posted May 30, 2019 Stock cranks are awesome. Have it welded and looked over and run stock. Quote
97Screamer Posted May 30, 2019 Report Posted May 30, 2019 Oem are better cranks. With that said either will be fine for your build. Quote
KwikShee Posted May 30, 2019 Author Report Posted May 30, 2019 Thanks guys appreciate the input. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.