Hiram Posted December 10, 2003 Report Posted December 10, 2003 I did a Racelogic port job on my jugs with my dremel and a flexable attachment, but I didn't do the transfer ports because I could'nt get in there even with a 90degree attachment. Any idea what I could use to get inside the jugs to get to the port windows and where to buy? Quote
chase73 Posted December 10, 2003 Report Posted December 10, 2003 race logic only charges 50 to do it Quote
Aussie Quad Racer Posted December 10, 2003 Report Posted December 10, 2003 i had the same problem when i did race logic with my dremal. I cant remember how high they said to cut the transfers? was it 3mm higher? Please remindme. Quote
erbilabuc Posted December 10, 2003 Report Posted December 10, 2003 they told me to leave that shit alone........... Quote
Hiram Posted December 11, 2003 Author Report Posted December 11, 2003 I believe it is supposed to be 43mm from the top of the jugs, I would love to be able to raise them and open them up as this is what feeds the mixture and can really make a difference. But for 50$ I will call Racelogic up and see, if not any ideas would be helpful.....I have one but what dentist would lend me his drills Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.