spdfreak98 Posted December 10, 2003 Report Share Posted December 10, 2003 well i took my carbs off and cleaned the heck out of them, checked everything and it was all clean. i adjusted the floats to spec and gas still pours out of the overflow. could the cold weather make the rubber to hard on the stopper? or could the o-ring on the needle valve be bad? Quote Link to comment Share on other sites More sharing options...
psd1 Posted December 10, 2003 Report Share Posted December 10, 2003 I had the same problem with mine a while back. Found out that after cleaning the carbs I had failed to take the drain screw out, sand had worked it's way in there and the thing wouldnt shut off all the way. Give that a try! Quote Link to comment Share on other sites More sharing options...
spdfreak98 Posted December 10, 2003 Author Report Share Posted December 10, 2003 well i went out and checked it..... and sure enough that was it.. it sounded like i had alot of dirt in there. thank u so much for the help, Quote Link to comment Share on other sites More sharing options...
psd1 Posted December 11, 2003 Report Share Posted December 11, 2003 well i went out and checked it..... and sure enough that was it.. it sounded like i had alot of dirt in there. thank u so much for the help, Sweet, I finally helped someone...do I get 2 stars or something??? Glad it worked out. I thought it was strange that could happen when I hadnt even removed that drain screw. Scary how dirt can get into such small places!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.