Medicshee350 Posted March 28, 2017 Report Posted March 28, 2017 I just advanced my timing 4 degrees and I'm having an extremely hard time starting it, the carbs were just fully rebuilt carbs are synced. But once it starts, it's first any time after that. And while riding it, it runs perfect. I have t5 pipes k and n air filter, tors delete parking parking braking delete, and recently advancing the timing 4 degrees. Could adaving the timing the 4 dregress be the problem. Quote
sheerider11 Posted March 28, 2017 Report Posted March 28, 2017 Did you do all of this at the same time? Quote
Medicshee350 Posted March 28, 2017 Author Report Posted March 28, 2017 Yeah when i did the timing plate mod I also cleaned them and set the floats right, and I did a plug chip to make sure my jetting was still all good. Quote
trickedcarbine Posted March 28, 2017 Report Posted March 28, 2017 Hmm. Check that the slides are in with the cutaways facing the rear. You'd be surprised how many guys try everything under the sun when it turns out they just had the slides flipped. 1 Quote
sleeper06 Posted March 28, 2017 Report Posted March 28, 2017 Also carb bowls are side specific if there on wrong it will give a hard start Quote
Medicshee350 Posted March 29, 2017 Author Report Posted March 29, 2017 I just checked and the cutaways are facing the rear. Quote
Medicshee350 Posted March 29, 2017 Author Report Posted March 29, 2017 The bowls are correct, when I get a chance I'm going to set the timing to 2 dregrees and see if it's easier to start. Quote
RIPPIN' IT UP Posted March 29, 2017 Report Posted March 29, 2017 Choke hose connected? Sent from my ZTE T84 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.