lsr_banshee Posted January 15, 2017 Report Posted January 15, 2017 Hi guys, I've been a member for several years, without much posting but I am hoping there might be some members who can help me with my outlaw build. Here is what I'm starting with. I have a few question already. Thanks Alan Sent from my SM-G900V using Tapatalk 3 Quote
bigweav81 Posted January 15, 2017 Report Posted January 15, 2017 Nice start! Sent from my SM-S820L using Tapatalk Quote
sheerider11 Posted January 15, 2017 Report Posted January 15, 2017 Your pretty much screwed. I'll buy that frame off you and give you a stocker to start over with 1 Quote
lsr_banshee Posted January 15, 2017 Author Report Posted January 15, 2017 Lol thanks sheerider. Question have you ever removed the upper case dampers? I got alittle more done Sent from my SM-G900V using Tapatalk 1 Quote
sheerider11 Posted January 15, 2017 Report Posted January 15, 2017 Lol thanks sheerider. Question have you ever removed the upper case dampers? I got alittle more done Sent from my SM-G900V using Tapatalk Actually I have. A few times. I have a write up in the technical section. http://www.bansheehq.com/forums/index.php?/topic/179749-top-case-motor-mount-removal/#entry1680819 Quote
lsr_banshee Posted January 15, 2017 Author Report Posted January 15, 2017 Thank you. You just saved alot of time. Maier front fenders fit horribly Sent from my SM-G900V using Tapatalk Quote
LaegerEliminator Posted January 15, 2017 Report Posted January 15, 2017 With the aftermarket chassis, be prepared to have to "massage" a lot of parts, pieces and components into place. Very few items will have a factory, oem type fit. Quote
lastnline75 Posted January 15, 2017 Report Posted January 15, 2017 Maier fit like shit on anything. Stockers, Fullbore,Laker all fit fine on an Outlaw. Sent from my SCH-I545 using Tapatalk 1 Quote
lsr_banshee Posted January 15, 2017 Author Report Posted January 15, 2017 I will look for some yellow stockers, I will never find yellow fullbores. Would you guys run 400ex or 450r spindles? Sent from my SM-G900V using Tapatalk Quote
lastnline75 Posted January 16, 2017 Report Posted January 16, 2017 I will look for some yellow stockers, I will never find yellow fullbores. Would you guys run 400ex or 450r spindles? Sent from my SM-G900V using Tapatalk Why not 250r like they were designed to use? Sent from my SCH-I545 using Tapatalk Quote
lsr_banshee Posted January 16, 2017 Author Report Posted January 16, 2017 Sheerider your write up was perfect, it cost me 6.48 +tax in material and those dampers popped out in seconds Sent from my SM-G900V using Tapatalk 3 Quote
lsr_banshee Posted February 8, 2017 Author Report Posted February 8, 2017 Got the motor in but the pipes are off a mile. Guys I am in central california, who would recommend taking my roller to, to have pipes made. Any help is greatly welcomed. Alan Sent from my SM-G900V using Tapatalk 1 Quote
LaegerEliminator Posted February 8, 2017 Report Posted February 8, 2017 What pipes are you planning to use? Any pics of the pipes in place? Attempt to be in place? Quote
Sandking Posted February 8, 2017 Report Posted February 8, 2017 Got the motor in but the pipes are off a mile. Guys I am in central california, who would recommend taking my roller to, to have pipes made. Any help is greatly welcomed. Alan Sent from my SM-G900V using Tapatalk Shearer could do it but he's in Hesperia, CA Quote
lsr_banshee Posted February 8, 2017 Author Report Posted February 8, 2017 I don't mind a couple hours of driving, I will contact him tomorrow Sent from my SM-G900V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.