PaymentPlan Posted October 21, 2016 Report Share Posted October 21, 2016 (edited) Does yamaha direct still sell? I've been looking around to see where they're available. Some on ebay, but they are ching chong knock off, not direct from OEM. More specifically, cylinders that are newish, not bored or ported. Sent from my SM-G900V using Tapatalk Edited October 21, 2016 by controls77 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 21, 2016 Report Share Posted October 21, 2016 Plenty of 64mm bore stock cylinders out there still. Gotta be patient, but you can totally find them unmolested. Quote Link to comment Share on other sites More sharing options...
PaymentPlan Posted October 21, 2016 Author Report Share Posted October 21, 2016 Plenty of 64mm bore stock cylinders out there still. Gotta be patient, but you can totally find them unmolested.Good to know, I'm on the hunt. I would like to have 3 to 4 sets on the shelf just to have for future use. Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 21, 2016 Report Share Posted October 21, 2016 Huh? Why? Quote Link to comment Share on other sites More sharing options...
PaymentPlan Posted October 22, 2016 Author Report Share Posted October 22, 2016 Huh? Why?Why not. Maybe not 3 or 4, but at least two sets. That way when I need them their in my possession and I don't have to wait and hunt. Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted October 22, 2016 Report Share Posted October 22, 2016 (edited) Kid on the BHQ FB page (or south texas banshee) was selling a set for 65 bucks, polished, but need a clean up bore.. Pm me and ill send you the link. Edited October 22, 2016 by Ayesully810 Quote Link to comment Share on other sites More sharing options...
0sikshee Posted October 22, 2016 Report Share Posted October 22, 2016 Can you port stock cylinders for a 10mil? Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted October 22, 2016 Report Share Posted October 22, 2016 It requires alot more work then porting, but yeah you can do a 10mil stock cylinder set up. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted October 22, 2016 Report Share Posted October 22, 2016 Niche cylinders are going fairly cheap these days. Not sure why you would want 3-4 sets. You have another banshee that's not a 10mil? Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
Richard Dryden Posted October 22, 2016 Report Share Posted October 22, 2016 This probably a dumb question. Are all those cheap cylinders on ebay niche cylinders? $199 for cylinders with cast pistons gaskets bearing rings. That's dirt cheap if just the cylinders are decent. Quote Link to comment Share on other sites More sharing options...
Richard Dryden Posted October 23, 2016 Report Share Posted October 23, 2016 Thanks. Then probably same piece. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.