hp2000 Posted May 11, 2016 Report Posted May 11, 2016 So you can run the lights while the bike is off. Yes lights on while motor is off. It will also eliminate flickering on low idle as you will have constant 12v and will extend the life of your LEDs as to if they're flickering you run the risk of burning them out. Quote
RagunCajun Posted May 11, 2016 Report Posted May 11, 2016 I'd only be concerned with extending LED life. What's the life difference of LED's with and without a battery? If I can get 10-20 hours then I'd be ok Quote
Seanzaay Posted May 11, 2016 Author Report Posted May 11, 2016 I'm just going to order my lights now and try to make them fit before everything gets sent to powder coat 1 Quote
87sheerips Posted May 11, 2016 Report Posted May 11, 2016 I don't want to cut the factory mounts just because once they are cut theres no going back Incorrect. http://www.jdscustoms.com/product/oem-steel-headlight-brackets-sold-pairs/ Quote
87sheerips Posted May 11, 2016 Report Posted May 11, 2016 Not to whore thread but we make a nice LED light bar bracket setup. Just buy the 13.5" Led Bar of your choice. http://www.jdscustoms.com/product/banshee-led-light-bar-brackets/ Quote
Seanzaay Posted May 11, 2016 Author Report Posted May 11, 2016 Not to whore thread but we make a nice LED light bar bracket setup. Just buy the 13.5" Led Bar of your choice. http://www.jdscustoms.com/product/banshee-led-light-bar-brI I saw the brackets on the JDS website but I wasn't completely set on the 13.5 but I think that's my best option right now. Do HQ members get discounts? Quote
87sheerips Posted May 11, 2016 Report Posted May 11, 2016 I saw the brackets on the JDS website but I wasn't completely set on the 13.5 but I think that's my best option right now. Do HQ members get discounts? Use "save5" coupon code when checking out. Brackets ready to ship tomorrow Quote
turbo-2nr Posted May 11, 2016 Report Posted May 11, 2016 (edited) Not the best pics but... Edited May 11, 2016 by turbo-2nr Quote
turbo-2nr Posted May 11, 2016 Report Posted May 11, 2016 Ridgid d2 with a simple garage made mount in stock mounts. Piece of aluminum round stock with brackets welded on Sent from my SM-N910T using Tapatalk Sent from my SM-N910T using Tapatalk Quote
bigweav81 Posted May 11, 2016 Report Posted May 11, 2016 Dunno, i think he was moving to a new location... He should have 'Forgot' to pay me shipping ;-) It's no big deal tho, i made a set for me too. I'll p.m. my address. Whatever you wanna send me free I'll take it......shipping on you as well. Thanks Sent from my SM-S820L using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.