turbo-2nr Posted March 31, 2016 Report Posted March 31, 2016 lightened and balanced crank? Who did that? It's either a rotrods or wisco don't remember Quote
Bennett131 Posted March 31, 2016 Report Posted March 31, 2016 It's either a rotrods or wisco don't rememberHe didn't ask you the brand, you still didn't answer his question. Quote
turbo-2nr Posted March 31, 2016 Report Posted March 31, 2016 I'm pretty certain I don't believe your claims.Fine with me , I may have lied a little bit made 56.x something last week, first pull made 53.x with only a plug swap between Quote
Bennett131 Posted March 31, 2016 Report Posted March 31, 2016 Fine with me , I may have lied a little bit made 56.x something last week, first pull made 53.x with only a plug swap betweenStill about 10hp too high imo, but it doesn't matter Quote
turbo-2nr Posted March 31, 2016 Report Posted March 31, 2016 He didn't ask you the brand, you still didn't answer his question.It's just an aftermarket one, guess you technically couldn't ballance it much since it don't have counter weights like a 4stroke Quote
turbo-2nr Posted March 31, 2016 Report Posted March 31, 2016 Still about 10hp too high imo, but it doesn't matterMaybe, I had free access to a dyno so I used it, I was suprised myself. Quote
sheerider11 Posted March 31, 2016 Report Posted March 31, 2016 It's just an aftermarket one, guess you technically couldn't ballance it much since it don't have counter weights like a 4strokeSo was ithe balanced and lightened or just anot aftermarket crank? Quote
Larry's Shee Posted March 31, 2016 Report Posted March 31, 2016 Spends money on crank balance, can't remember where, FTMFCSW !! Troll on MF !! Quote
tfaith08 Posted March 31, 2016 Report Posted March 31, 2016 What's "fast" my build is pretty basic. Lightened/balanced/ welded crank, hotrods rods,wisco 40 over piston. TDR carbon reeds,stock carbs,PTR mid pipes, K&N, stock box no lid,stock timing,stock ports,stock head,pump gas Makes 57whp and is plenty fast in the trails I'd call that 42ish, definitely not 57. Did we end up deciding on Duncan or no? ISO purple BHQ hat. Sent from the whoops. Quote
The long john Posted March 31, 2016 Author Report Posted March 31, 2016 Read and you'll figure it out. Quote
tfaith08 Posted April 1, 2016 Report Posted April 1, 2016 I did read. My deduction is that you have some experience with mechanical situations but have a slight bias against forums. As such, you go for an opinion since you have no application knowledge, but take it with a grain of salt. You also believe that others on here are a big huddle of people that blindly regard things as truth but don't have any foundation behind what we have to say. That's where you would be wrong. WE are the subject matter experts. WE know who you should and should not deal with and have forced what is best for your happiness with this sport and your wallet down your throat. If you choose not to listen, prepare for the bs that follows. If you intend to get under our skin by calling us "keyboard warriors" or other similar names, you'd better search for another method. It happens about twice a week and all that comes of it is that you'll be labeled as a guy who won't listen. ISO purple BHQ hat. Sent from the whoops. 1 Quote
The long john Posted April 1, 2016 Author Report Posted April 1, 2016 I'm not sure where you get that I don't take what you guys say into consideration, I just like more then one opinion, if I didn't care what you said I wouldn't ask. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.