Jump to content

Low end bogging help


NRA

Recommended Posts

Hello all. I am new here and have done much researc. I just picked up a 06 very clean. Stock motor, only mods are pro circuit platinum exhaust, boost bottle, pro design intake w kn, tors delete. I'm having an issue w a low end bog during initial clutch release. Have to really get her singing in order to take off or she bogs hard and wants to stall. I suspected the carbs needed to be cleaned and possibly a clogged pilot, so I ran a compression check and both cyl were 125. Then proceeded to clean and inspect carbs. Did not see anything in the jets or carbs that was like "ahhh here we go" .... Mains are 280 and pilots are 25. Put her back together to same results. Any help would be much appreciated, thanks in advance

Link to comment
Share on other sites

Thanks for your reply sheerider. Just picked this machine up, it was in storage for the past three years and has little use. The tors delete was installed by a Yamaha dealer and has the added idle screw kit installed. Does this make any difference on your instructions?

Link to comment
Share on other sites

Thanks for your reply sheerider. Just picked this machine up, it was in storage for the past three years and has little use. The tors delete was installed by a Yamaha dealer and has the added idle screw kit installed. Does this make any difference on your instructions?

No, and just to be clear - he said air screws, not idle screws.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...