OEM upper A-Arms - Question

[250rfan]

Guys,

 

Does anyone know if the OEM upper A-arms from years 1991-2003 part numbers  - 3GG-23540-00-35 and 3GG23550-00-35 fit the 2005 Banshee?, the part numbers change at 2004 to 3GG-23540-00-PO and 3GG23550-00-PO.

 

Does anyone know if there is any difference?

 

I need a set of OEM upper A-Arms for my 2005, ebay have new replacements at a good price but they are for 1991-2003 years.

[speeshee]

I think they would fit. I haven't heard of any update to the front suspension after a arms came out on them. You'll need opinion from someone else because I'm not sure

 

 

Sent from my iPhone using Tapatalk

[vrx46]

A arms from any banshee from 1991 on will fit your frame

[ban565]

I have a 1991 and put 2006 upper and lower a arms on it

[Bennett131]

If you have an a arm frame, all banshee a arms will fit.

[hoppedupandcutdown]

They will fit. Different colors had different part numbers.

[250rfan]

Thanks very much Guys,

 

Ask the right question - you get the right answer, the different colours will explain the part number change.

 

Looks like I have a relatively cheap fix now.

 

Great site - Great members

 

Thanks again for all who replied.

 

G.

[bluebanshee98]

Unless you get the set dirt cheap why not go with extended arms? Alba arms aren't too expensive

[250rfan]

Thanks bluebanshee98

 

But I need a standard width front on this Banshee to make it easier going through the dunes, if the fronts wide you end up with the front steering the quad due to the dunes rather than the rider, I run an extended rear which is fine as it just follows the front without to much unsettling of the steering.

Difficult to explain but for the dunes we have here a narrow front just makes an easier more enjoyable ride especially at speed.

 

 

 

Thanks

-G