james222 Posted August 3, 2015 Report Share Posted August 3, 2015 Hi everyone! So I was doing banshee, and all of a sudden, it's rpm slowly starts decreasing, and ends up stopping. At first I thought I hard drained the fuel tank, but there was still some fuel remaining in the tank, so I put the switch on reserve, try to start it, won't start. I then remembered that the guy who sold it to me told me that if it doesn't start, I should check if a tube might be missing between the carburators. (He told me that because it had happened to his friend). Anyways, here's a picture of my 2 carbs. I'm thinking that there might be a missing tube between the big tube on the right and the choke tube? on the left. Am I wrong or is there really supposed to be a tube there? Thanks. Quote Link to comment Share on other sites More sharing options...
Banshee_82 Posted August 3, 2015 Report Share Posted August 3, 2015 No it should only have the one tube going between them. I had the same problem with my shee. Quote Link to comment Share on other sites More sharing options...
james222 Posted August 3, 2015 Author Report Share Posted August 3, 2015 No it should only have the one tube going between them. I had the same problem with my shee. So no it's not missing a tube or no, it's missing a tube? Quote Link to comment Share on other sites More sharing options...
kawa110 Posted August 3, 2015 Report Share Posted August 3, 2015 Ur tube is not missing Quote Link to comment Share on other sites More sharing options...
james222 Posted August 3, 2015 Author Report Share Posted August 3, 2015 I noticed a weird behavior. When I hold the clutch and shift, the gear takes a couple seconds to engage, is it normal? Quote Link to comment Share on other sites More sharing options...
james222 Posted August 3, 2015 Author Report Share Posted August 3, 2015 Giant pile of junk of a boost bottle and those fuel lines would be in the trash can if it was mine. Really? I'm new to Banshees... and 2 strokes in general. Also, I noticed a strange behavior. When I change gears, there is a delay between the time I lift the gear thigny and the time you hear the gear engaging. It takes 1-2 seconds to go into gear, is this normal? Quote Link to comment Share on other sites More sharing options...
dirtmunkee Posted August 3, 2015 Report Share Posted August 3, 2015 First off you need to stop "doing your banshee". It probably doesnt like that. May have packed the muffler to tight:). Im sorry i just had to say it. (Proofread then click post).lol but as far as your problem im at a loss on that one. Id like to see what the cause is. Good luck with it. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted August 3, 2015 Report Share Posted August 3, 2015 Didn't know Banshee had "thingies" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.