BANSHEEBEEFM2M Posted July 20, 2015 Report Posted July 20, 2015 Got a nice extended durablue for sale hmu Quote
tfaith08 Posted July 20, 2015 Report Posted July 20, 2015 The YFZR spindles apparently bolt up and work very well and they're made of aluminum iirc. I'm passively looking for a set. Quote
RagunCajun Posted July 21, 2015 Report Posted July 21, 2015 what aftermarket front brake rotors work? I dont see any on ebay nor vendor sites. I already upgraded everything else. Quote
bluebanshee98 Posted July 21, 2015 Report Posted July 21, 2015 ^ this he's making me some as we speak Quote
Dunatic619 Posted July 21, 2015 Author Report Posted July 21, 2015 Does it matter what year yfz the Hubs are off of? Quote
tfaith08 Posted July 22, 2015 Report Posted July 22, 2015 I'm almost sure all the pre-YFZR calipers are the same, but the master cylinders are different for 07 and up (which is the one you want). Quote
Abe Posted July 24, 2015 Report Posted July 24, 2015 I had a complete yfz spindle set up on the front with my +2+1 lsr arms. Requires about a 1/2 inch longer tie rod than usual and must be used with aftermarket arms with some type of adjustments or the camber will be way off. Then after you geto all this lined out and your stoked about your new aluminum spindles you will find out the tie rods hit the upper arm before reaching full lock left to right. I'm sure this could be worked out but don't expect it to just work Quote
Dunatic619 Posted July 24, 2015 Author Report Posted July 24, 2015 Picked up my hubs too! Bearings and hubs should be here in about a week. Thanks for all the help everyone. I really appreciate it. Hubs will defiantly be powder coated before they're put on. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.