ken b Posted June 14, 2015 Report Posted June 14, 2015 Im in the process of building a 535 pv its been to passion racing have installed in the bike again had it on the dyno 71 hp at the rear wheel not 100% happy with that but what ever. The problem im having is finding a set of air filters that don't interfere with the exhaust and frame it has 39mm d slide carbs and shear bb in frame pipes any help would be great. Quote
Sandking Posted June 14, 2015 Report Posted June 14, 2015 Wow 71hp ouch. If your using reed spacers take them off and use the angled pods. If it's still tight put the heat sleeves on the stinger pipes. The upp intakes also tighten things up. Quote
ken b Posted June 14, 2015 Author Report Posted June 14, 2015 Nope no spacers the exhaust is all wrapped, What do you mean by upper intakes tighten things up Quote
special06shee Posted June 14, 2015 Report Posted June 14, 2015 Upp intakes dont throw the carbs back/up as far as other intakes. Billet intakes are the worst for tight spots. Quote
special06shee Posted June 14, 2015 Report Posted June 14, 2015 And yes, do yourself a favor and have that motor gone over by someone that knows a thing or two. 71hp is absolutely embarrassing. Those are a beast of a motor when built right. 1 Quote
ken b Posted June 14, 2015 Author Report Posted June 14, 2015 It does have UPP intakes on it does that mean I just buy new air filters every couple of rides? I thought I did send it to someone who new what they were doing have any suggestions of a better person? Quote
Sandking Posted June 14, 2015 Report Posted June 14, 2015 Take a picture of your filters and post it. Cascade sells sleeves that won't mess the filters up. 1 Quote
special06shee Posted June 14, 2015 Report Posted June 14, 2015 You can get cascade sleeves for the stinger tubes. The filters can lay tight up against them and will not melt. They sell them in two different lengths. I believe 8" and 16". Id call around to various builder that have dynos in house. No reason that motor should not make between 100-130hp depending on carbs, pipes,fuel. 71hp is not even ball park numbers of what that thing should make. 1 Quote
bigweav81 Posted June 15, 2015 Report Posted June 15, 2015 how do I upload pic?Try tapatalk. sent from yo mammy house Quote
trickedcarbine Posted June 15, 2015 Report Posted June 15, 2015 When did you get him to do the work? And there is a definite problem with that motor, Jim did my stock cyl and it's over 80 with a couple tweaks. Quote
Coupelx Posted June 15, 2015 Report Posted June 15, 2015 i tied my filters together to keep them away and im running chunky UNI filters. and yes 71hp? FFS thats embarassing. Quote
Deadbeat Posted June 15, 2015 Report Posted June 15, 2015 one member on here got thier cub ported by passion and it made less hp than as cast Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.