ABQ Posted March 25, 2015 Report Posted March 25, 2015 Well I've finally got her back together after pulling her completely apart and painting the frame. Now she won't start..... Did a carb rebuild while putting her back together and put in new plugs. If I use some starter fluid in the mouth of the carbs she will run for a sec. Not really sure what to do. Any ideas? Quote
Phelps Posted March 25, 2015 Report Posted March 25, 2015 turn the gas on? pull the choke? choke tube between the carbs on? slides in the right carbs? Quote
sprinklerman Posted March 25, 2015 Report Posted March 25, 2015 Post full size image of avatar for further assistance. 1 Quote
ABQ Posted March 25, 2015 Author Report Posted March 25, 2015 Yep gas is on choke out and choke tube is in place. Slides appear to be working fine. Quote
ABQ Posted March 25, 2015 Author Report Posted March 25, 2015 I used just a touch of starter fluid. Quote
Phelps Posted March 25, 2015 Report Posted March 25, 2015 if it starts on starting fluid its a lack of fuel. Quote
gusto Posted March 25, 2015 Report Posted March 25, 2015 When you painted the frame did you leave a good spot of bare metal for the ground? Have spark? Quote
special06shee Posted March 25, 2015 Report Posted March 25, 2015 FFS! don't use starting fluid, brake cleaner or carb cleaner. you can kiss your engine goodbye. UGHi spray the piss out my junk with all of the above? My shit will start one way or another 2 Quote
bigweav81 Posted March 26, 2015 Report Posted March 26, 2015 (edited) Fuck your shed won't start, and my shed won't stay locked. It's a crazy world out there.....that is a fat ass daaaaaaaammmmmnnn! Edited March 26, 2015 by bigweav81 2 Quote
sprinklerman Posted March 26, 2015 Report Posted March 26, 2015 keep sprayin your junk with it, I don't give a shit. no point in ruining a perfectly good motor of someone elses. your spraying it with a product that has 0 lubricating poperties, fuckin genius right? use WD-40 or something, at least that has some oil in it, most guys with a half a brain will put pre-mix in a windex bottle but that's prolly too easy for ya special06 Meh. Special06 motor is on alky. Ever seen how much oil is already in an alky motor at 20:1 ?And anyone with half a brain knows you just hit the filters with a spritz ..you don't hose down the carb with it. 1 Quote
special06shee Posted March 26, 2015 Report Posted March 26, 2015 keep sprayin your junk with it, I don't give a shit. no point in ruining a perfectly good motor of someone elses. your spraying it with a product that has 0 lubricating poperties, fuckin genius right? use WD-40 or something, at least that has some oil in it, most guys with a half a brain will put pre-mix in a windex bottle but that's prolly too easy for ya special06 you need some guidance... 1 Quote
special06shee Posted March 26, 2015 Report Posted March 26, 2015 Meh. Special06 motor is on alky. Ever seen how much oil is already in an alky motor at 20:1 ? And anyone with half a brain knows you just hit the filters with a spritz ..you don't hose down the carb with it. shut up stupid. Quote
sprinklerman Posted March 26, 2015 Report Posted March 26, 2015 Like you said, keep spaying your junk with it then, you didn't mention it was alcohol, wich has nothing to do with ABQ's problem now does it? some of you fuck sticks do nothing but troll posts to see who you can make an ass out of, your not here to help anyone....... ABQs problem is that he hasn't posted the full size avatar picture yet.Btw,,is " you're ". Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.