RKJLOW Posted February 18, 2015 Report Share Posted February 18, 2015 What should be a close jetting for 3250-4800 ft mods pod filters, +4 timing, fmf fattys, vitos pistons, vitos reeds, coolhead 21cc domes, running 32:1 Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted February 18, 2015 Report Share Posted February 18, 2015 Tell us what your perfect jetting is at what elevation, Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 18, 2015 Report Share Posted February 18, 2015 Vito's superstock pistons? Quote Link to comment Share on other sites More sharing options...
RKJLOW Posted February 18, 2015 Author Report Share Posted February 18, 2015 Yeah superstock's, My elevation now is around 1500 feet. im jetted at 320 30 and 1.5 out on the screws. its rich, i plug chopped in last june it was on the rich side. i dont have anywhere close to chop it again so i let it be...... it doesn't bog and runs good Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 19, 2015 Report Share Posted February 19, 2015 Keep the 30, but maybe try a 27.5 pilot. I bet the 30 is just fine with an air screw adjustment. The main, I'd leave unless it was enough to notice loss in power. It's possible one size smaller is still safe for the motor. Maybe give power jets a try, or a dial a jet. Quote Link to comment Share on other sites More sharing options...
Uf21 Posted February 23, 2015 Report Share Posted February 23, 2015 (edited) What should be a close jetting for 3250-4800 ft mods pod filters, +4 timing, fmf fattys, vitos pistons, vitos reeds, coolhead 21cc domes, running 32:1 Temperature? I ride at 3500ft - 4500ft and temperature is usually around 5-15 degrees (cant be fucked finding out what that is in fahrenheit). My mods are k&n pods and exhaust and my jetting is 300 main & 27.5 pilot. Edited February 23, 2015 by Uf21 Quote Link to comment Share on other sites More sharing options...
RKJLOW Posted February 24, 2015 Author Report Share Posted February 24, 2015 I jetted it to 310 30 but having other issues with it so I didn't get to go.... Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted February 24, 2015 Report Share Posted February 24, 2015 why Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.