aleyesonme Posted January 7, 2015 Report Posted January 7, 2015 Need help, can some one recognize what port this could be, or may look like. ..thanks is advance Quote
aleyesonme Posted January 7, 2015 Author Report Posted January 7, 2015 RU? Is that his screen name? Quote
trickedcarbine Posted January 7, 2015 Report Posted January 7, 2015 Need pics of actual ports in the bore. Pics of bottom of cylinder where the transfers are. Just the intake won't tell ya much. Also some heights of top and bottom of each port from the deck height. Quote
BUILDER Posted January 7, 2015 Report Posted January 7, 2015 I would say from my many many many years of experience that looks like a banshee port to me. 2 Quote
sprinklerman Posted January 7, 2015 Report Posted January 7, 2015 I would say from my many many many years of experience that looks like a banshee port to me.Intake port to be exact. Quote
sleeper06 Posted January 7, 2015 Report Posted January 7, 2015 Registered user should be able to tell , minimal at best Quote
BUILDER Posted January 8, 2015 Report Posted January 8, 2015 Intake port to be exact. Shit I missed that part thanks for clearing that up Sprinklerman Quote
aleyesonme Posted January 8, 2015 Author Report Posted January 8, 2015 From the replies, I see its not a reputable port that's worth looking into....THANK YOU ALL for the replies. Quote
sleeper06 Posted January 8, 2015 Report Posted January 8, 2015 Good news is looks like there's plenty of meat to work with if it's still got bored left in it, at least it's not hacked to all hell. I would be willing to measure them up for you and run them on a degree wheel if u wanna ship it let me know 2 Quote
aleyesonme Posted January 8, 2015 Author Report Posted January 8, 2015 Oh ok,.in that case I'll gett pics up when I go on lunch...thank you Quote
aleyesonme Posted January 8, 2015 Author Report Posted January 8, 2015 Good news is looks like there's plenty of meat to work with if it's still got bored left in it, at least it's not hacked to all hell. I would be willing to measure them up for you and run them on a degree wheel if u wanna ship it let me knowThank you, how kind... ill be letting you know if I decide to do that Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.