grn8 Posted December 27, 2014 Report Posted December 27, 2014 Hey guy just wanted to introduce my self. I'm fairly new to the drag scene, I'll be ridding more out in Dumont and wanted to start drag racing in the next up coming year. I just got a 4mil in a trade and wanted to give you guys a little run down to see what y'all think. Hot Rod long rod 4mill stroke crank Wisco racing Pistons 65.25 R-1 clutch Assembly Hybrid Frame Lightweight 10 over arrow tubing swingarm 8 x 8 wheels Douglas blue label Staggered triple buff 10 paddle aka Blue label Douglas triple buff Mohawks Renthal gold chain new sprockets front and rear Piggly fuel petcock 04 banshee clean title and registration fully updated Power pros drag pipes Shaved stock head Trinity timing plate and lightened flywheel(8degrees Advanced) V-forced three reads Mikuni 40 mm Alky carbs.120dumps & .120main clipper power Jets polished chariot bowls oversized New air filters k&n I'm a 250lb rider just wanted to see if I'm in the direction for now? Thanks Quote
Surfrjag Posted December 27, 2014 Report Posted December 27, 2014 Welcome to the addiction! They dont make 65.25 longrod pistons and very rare to see a stock head cut forba 4mil. Are you sure about the info you were given? Edit.. unless that is you have a spacer under the cyls Quote
sprinklerman Posted December 27, 2014 Report Posted December 27, 2014 I'd recommend meeting up with some of the BHQ members who also ride at Dumont. They can provide invaluable advice . Especially if you run into jetting or trouble shooting issues,,or if you need setup help. Always better in person for that kind of stuff. Quote
grn8 Posted December 27, 2014 Author Report Posted December 27, 2014 The info I provided is straight from the guy I got the quad. In regards in porting I wouldn't know because he didn't mention anything in porting. I'm stating to worry now guys. Hope the guy didn't BS me. Quote
grn8 Posted December 27, 2014 Author Report Posted December 27, 2014 Surfrjag I just looked at the motor and I only saw gaskets not spacer. Quote
Surfrjag Posted December 27, 2014 Report Posted December 27, 2014 Well... lets see some pics of your new ride. How many gaskets? Quote
grn8 Posted December 27, 2014 Author Report Posted December 27, 2014 Well... lets see some pics of your new ride. How many gaskets? I only saw one gasket or two from what I could tell. It won't let me upload a pic. It says file to big. How do I resize the picture? Quote
Surfrjag Posted December 27, 2014 Report Posted December 27, 2014 Using photobucket or tapatalk app is easiest way to post pics Quote
grn8 Posted December 27, 2014 Author Report Posted December 27, 2014 Using photobucket or tapatalk app is easiest way to post pics Sounds good I'll look in to it. Thanks The way it's looking like it's BS on the motor specs. Quote
grn8 Posted December 27, 2014 Author Report Posted December 27, 2014 (edited) what kind of frame Stock frame. The two tubes in front of the engine are cut out. Edited December 27, 2014 by grn8 Quote
Deadbeat Posted December 30, 2014 Report Posted December 30, 2014 so why did you list hybrid frame Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.