Pastrykiller Posted September 23, 2014 Report Posted September 23, 2014 Kamikaze...im pretty positive that your are chasing a carb sync issue. Ive been there and done that. Take your time and set the carbs correctly and you should notice the change. That serval will impress you. I run a +6 swinger and when the tires hook, the front end will point to the sky. 2 jet sizes in the wrong direction will make it feek weak. When its spot on, you will knowm Quote
KAMIKAZE Posted September 23, 2014 Author Report Posted September 23, 2014 Cheers bud I'll keep playing with it ATM it won't lift the wheels on the road and I have stock swing arm Ive got some more plugs and jets will keep at it just feels like it falls off on the top end Not sure if I mentioned I have cel needle middle clip and air screw 2 turns out Quote
KAMIKAZE Posted September 23, 2014 Author Report Posted September 23, 2014 Carbs are synced and open fully Quote
Pastrykiller Posted September 23, 2014 Report Posted September 23, 2014 Post pics of your carb slides from the air filter side. Do not give it throttle at all, just post pics of them and make sure they are clear. Quote
KAMIKAZE Posted September 23, 2014 Author Report Posted September 23, 2014 Aaannndddd its fucked Cruising in 2nd to warm it up to try new jetting and it rattled and locked up Will get pics up soon Quote
KAMIKAZE Posted September 23, 2014 Author Report Posted September 23, 2014 That was one expensive paperweight Quote
sleeper06 Posted September 23, 2014 Report Posted September 23, 2014 Is that the same side air leak was on? Quote
KAMIKAZE Posted September 23, 2014 Author Report Posted September 23, 2014 Nope air leak was under left reed (sitting on bike) Quote
LaegerEliminator Posted September 23, 2014 Report Posted September 23, 2014 Rod bearing failure? Sent from my DROID RAZR using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.