DirtDiggler69 Posted August 25, 2014 Report Posted August 25, 2014 Stock carbs , 340 mains stock needle and height , 27.5 pilots. Has slight off idle bog . Air screws are 1.5 out. Idle doesn't hang. Any thoughts on curing the little bog? Otherwise it pulls hard . Quote
Atomic Monkey Posted August 25, 2014 Report Posted August 25, 2014 Turn the air screws in a turn. Quote
DirtDiggler69 Posted August 26, 2014 Author Report Posted August 26, 2014 What was nice is I used the stickied jetting guide from all the different members set ups , I found my set up and copied it. It's damn near spot on Quote
trickedcarbine Posted August 26, 2014 Report Posted August 26, 2014 Huh, ya don't say........? You just literally looked at one of the firs threads in the jetting section, read it, and applied it and it actually worked? DAS BANANAS YO! Quote
Dirtsurferaust Posted September 7, 2014 Report Posted September 7, 2014 I run the toomey needles with My pros clean and crisp all the way through Also running 340 with hi flow filter in modded airbox and v4 runs perfectly Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.