J-Madd Posted April 17, 2014 Report Share Posted April 17, 2014 Measure the bolt hole distance and I can measure my other twister and see if they are the same. I wanna say they are kx250, or kx125. I got my intakes from PPS. If they are the same I will find out what the actual OEM application is. Quote Link to comment Share on other sites More sharing options...
ban565 Posted April 17, 2014 Report Share Posted April 17, 2014 http://67.199.65.66/twistercrankshaft/store/store_view.cfm?store_area_id=22&STORE_DEPT_ID=286 Quote Link to comment Share on other sites More sharing options...
J-Madd Posted April 17, 2014 Report Share Posted April 17, 2014 CR125 it is then. I was sure it was KX, but I guess not. I'm wondering now if I should get the bigger intake adaptor and run the bigger reeds. I'm not sure about running bigger exhaust flanges on that small of a motor. Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted April 17, 2014 Report Share Posted April 17, 2014 Packard might have those as well. His prices on intakes and things have always been good. He recommended 44s on my motor but with the size of the stock size VF reeds I stuck with some carbs bored to 42.5mm instead. Quote Link to comment Share on other sites More sharing options...
ban565 Posted April 18, 2014 Report Share Posted April 18, 2014 no adapter needed tp run the cr 125 reeds. I use bf on a 6 mil Quote Link to comment Share on other sites More sharing options...
J-Madd Posted April 18, 2014 Report Share Posted April 18, 2014 The reeds hit the intake bridge on mine if you put them directly into the intake without the adaptor/spacer. Quote Link to comment Share on other sites More sharing options...
ban565 Posted April 18, 2014 Report Share Posted April 18, 2014 might be a dffrerent version than mine. I bought mine in 2009 Quote Link to comment Share on other sites More sharing options...
jay shafer Posted April 18, 2014 Author Report Share Posted April 18, 2014 Sent from my SGH-M919N using Tapatalk Quote Link to comment Share on other sites More sharing options...
jay shafer Posted April 18, 2014 Author Report Share Posted April 18, 2014 Sent from my SGH-M919N using Tapatalk Quote Link to comment Share on other sites More sharing options...
J-Madd Posted April 19, 2014 Report Share Posted April 19, 2014 Quote Link to comment Share on other sites More sharing options...
87sheerips Posted April 21, 2014 Report Share Posted April 21, 2014 If u guys need anything custom made, adapters etc I can help. Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted April 23, 2014 Report Share Posted April 23, 2014 My mini has cr125 cages, I have some extra stock cr cages with carbon fiber reeds if somebody needs some. I also have a set of big flnge ex. adaptors if somebody needs also Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.