registered user Posted April 6, 2014 Report Posted April 6, 2014 i found this pic on the intanet. does someone know if its a lonestar frame and swingarm ? would this chassis and swingarm setup be a good hillshooter setup ? Quote
registered user Posted April 6, 2014 Author Report Posted April 6, 2014 i wasnt sure because the frame and swingarm thats shown on the lonestar site appears to be alittle different. maybe the bike in the pic was made a few years back and the new stuff has changed alittle ? Quote
registered user Posted April 6, 2014 Author Report Posted April 6, 2014 regarding the stock cases and billet cases: are the engine and swingarm mount locations the same ? so if i used lonestar frame with stock cases and upgraded to billet cases later would the frame mounts have to be changed ? Quote
locogato11283 Posted April 6, 2014 Report Posted April 6, 2014 regarding the stock cases and billet cases: are the engine and swingarm mount locations the same ? so if i used lonestar frame with stock cases and upgraded to billet cases later would the frame mounts have to be changed ? Motor mounts on OEM cases are the same as billet cases. Either will bolt into a LSR chassis. Quote
registered user Posted April 6, 2014 Author Report Posted April 6, 2014 ok cool. thinking i might build up something. lonestar stuff is looking real tempting. got 15G limit on the cc. that should get me started Quote
locogato11283 Posted April 6, 2014 Report Posted April 6, 2014 Call Sandtoyz Unlimited. They are the dealer for LSR. Tell John you got the info from Tyler at BansheeHQ. Quote
registered user Posted April 6, 2014 Author Report Posted April 6, 2014 ill tell him you sent me. do you know on the crankworks billet 10mil crank what rod they generally use ? Quote
#1JUANstunna Posted April 6, 2014 Report Posted April 6, 2014 ill tell him you sent me. do you know on the crankworks billet 10mil crank what rod they generally use ? Last time I told someone Tyler, BHQ owner, sent me I wanted on parts for 6 months. Oh NM I still haven't got the parts to be a matter of fact. Quote
registered user Posted April 6, 2014 Author Report Posted April 6, 2014 well i could buy direct from lonestar and avoid any middleman hassle Quote
registered user Posted April 6, 2014 Author Report Posted April 6, 2014 so do you know what rods on the crankworks billet 10mil ? is it billet rod also of 115mm ? Quote
locogato11283 Posted April 6, 2014 Report Posted April 6, 2014 well i could buy direct from lonestar and avoid any middleman hassle They will likely tell you to call STU. STU stocks more drag chassis than LSR. Quote
RagunCajun Posted April 6, 2014 Report Posted April 6, 2014 Now where's some videos of those bad ass bikes posted above?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.