ohSIXshee Posted April 3, 2014 Report Posted April 3, 2014 Who's running them and how did you mount them. Pics please. Sent from my SM-N900P using Tapatalk Quote
cary724 Posted April 3, 2014 Report Posted April 3, 2014 Only pic I have on me. Ill post a couple more later. I mounted in stock location. (Don’t mid the shocks, this was just holding the bike up waiting on my LT shocks to come in) 1 Quote
ohSIXshee Posted April 3, 2014 Author Report Posted April 3, 2014 Cool cool, looks like you cut the stock brackets off. Did you have to weld a tab to off set the bolt from hitting the shock or just drill the hole as far over as possible? Sent from my SM-N900P using Tapatalk Quote
cary724 Posted April 4, 2014 Report Posted April 4, 2014 yea, cut the tabs and then drilled a hole. Originally i had the flood pastern lights, but the distance wasn't that great, so changed them to the spots, much better now. Quote
bansman76 Posted April 4, 2014 Report Posted April 4, 2014 I really like those lights. Wonder about one spot and one flood Quote
cary724 Posted April 4, 2014 Report Posted April 4, 2014 Yea, was thinking about that also. I still have the floods, haven't sent them back yet. I'll try the 2 spots and if I don't like it, I'll try one of each. Quote
ohSIXshee Posted April 4, 2014 Author Report Posted April 4, 2014 yea, cut the tabs and then drilled a hole. Originally i had the flood pastern lights, but the distance wasn't that great, so changed them to the spots, much better now. Looking good, thanks for the pics now I know what I'm doing next. Sent from my SM-N900P using Tapatalk Quote
ohSIXshee Posted April 4, 2014 Author Report Posted April 4, 2014 Now I have another question. What did you do for dc conversion and battery? I just got the race tech electric 200watt dc stator kit. Now I'm just trying to figure out a battery. Sent from my SM-N900P using Tapatalk Quote
VoOK Posted April 4, 2014 Report Posted April 4, 2014 (edited) Are these lights plug and play? Kinda looks like these can mount onto the trail tech round base which would not require cutting off the tabs. Edited April 4, 2014 by VoOK Quote
cary724 Posted April 4, 2014 Report Posted April 4, 2014 Now I have another question. What did you do for dc conversion and battery? I just got the race tech electric 200watt dc stator kit. Now I'm just trying to figure out a battery. Sent from my SM-N900P using Tapatalk Hats what I did, Race tech 200 DC conversion. Then I wires it to the stock light switch. I'm also running their 12 batt. I'll get a pic of where I put the batt Quote
atvrider85 Posted May 9, 2014 Report Posted May 9, 2014 Did you wire those lights through the factory switch? And what about the high low switch. Quote
cary724 Posted May 9, 2014 Report Posted May 9, 2014 when i did lights, i cut off the plugs from the stock lights and used those. since these lights don't have a high/low beam, i wired the positive wire of the lights to both the high/low beam wires. I did the same. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.