Barracuda282 Posted November 12, 2003 Report Share Posted November 12, 2003 I'm going to get procircuit pipes, k&n and adapter that leaves me with another 250, should i get a head, razrs, v-force reeds, or something else?? Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted November 12, 2003 Report Share Posted November 12, 2003 I'd go with some V-Force reeds & see about milling your head....may be able to do both with your 250... I'm more than happy with my milled head,...unless you're wanting to be able to change out domes & for looks, I'd just mill the head & save you some money. I've heard great things about Noss heads,...would probably get one of them over a coolhead myself. + they're a bit purtier. Quote Link to comment Share on other sites More sharing options...
Leadfoot350 Posted November 13, 2003 Report Share Posted November 13, 2003 If you ever want to get it ported then buy a aftermaket head because it will change your compression a lot and your shaved head will be useless. There is a guy that sells v-force on ebay for 200 so check that out too. Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted November 13, 2003 Report Share Posted November 13, 2003 im with Led, get some head......... Quote Link to comment Share on other sites More sharing options...
txblueshee Posted November 13, 2003 Report Share Posted November 13, 2003 im with Led, get some head......... LMAO..... Word!!!!! Mike Quote Link to comment Share on other sites More sharing options...
silveradohd Posted November 13, 2003 Report Share Posted November 13, 2003 I would advance the timing & get a new head. I Have V-Force reeds, do not think they are worth the money. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.