jigsaw4089 Posted February 25, 2014 Report Posted February 25, 2014 Stick a 7mm crank in your stock cylinders with a set of 795 series 65mm pistons With porting and carbs I'll get you mid to high 80's HP with a broader power curve than a stock stroke big bore. That would be one hell of a sleeper!! Quote
Pasi S. Posted February 25, 2014 Report Posted February 25, 2014 How much money you can burn at once? Quote
topfuel! Posted February 25, 2014 Report Posted February 25, 2014 7mil is the most stroke you can put in stock cylinders without sleeving them, the cases do require trenching fo anything over 4mil stroke. Eric built a 7mil stock cyl for a friend of mine that would eat 4mil cubs for breakfast! Quote
jigsaw4089 Posted February 26, 2014 Report Posted February 26, 2014 7mil is the most stroke you can put in stock cylinders without sleeving them, the cases do require trenching fo anything over 4mil stroke. Eric built a 7mil stock cyl for a friend of mine that would eat 4mil cubs for breakfast! Im going to go that route once its time for a rebuild!! Quote
topfuel! Posted February 26, 2014 Report Posted February 26, 2014 Im going to go that route once its time for a rebuild!!I should have elaborated, you can put more than 7mil in stock cylinders but 7 is the most you can go without sleeving or spacer plate 7mil with stock base gaskets will leave 3.5mm of the crown out of the bore and put the top ring at deck height. They're badass sleeper engines, I've been wanting to build one for a while but I need to find another shee to build first. Quote
Strm Trpr Posted February 27, 2014 Report Posted February 27, 2014 Who makes 7mil cranks and how much $$$? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.