dunerider787 Posted January 28, 2014 Report Posted January 28, 2014 ive posted about this before, 10 mil stock cylinder asking what its worth. thinking about asking 450 for the cylinders and head, will include pistons, but id recommend new ones. will have fresh hone. and a 10mil hot rods crank , little play in rods, asking 300? any suggestions. Quote
dunerider787 Posted January 28, 2014 Author Report Posted January 28, 2014 triple ported stock cylinder 10mil, 68mm sleeve, Quote
Coupelx Posted January 28, 2014 Report Posted January 28, 2014 pics? its not worth what it costs to build unfortunately. Probably hard to sell too but i think 450 is fair. i think it would be neat to have one. Quote
n2otoofast4u Posted January 28, 2014 Report Posted January 28, 2014 Who did the work on the cylds? Quote
dunerider787 Posted January 28, 2014 Author Report Posted January 28, 2014 rick kiro, did the work on the cylinders this eli "big ends" old top end, and ya i can get some pics up. Quote
part-time Posted January 28, 2014 Report Posted January 28, 2014 How did setup run compared to 10mil cub Quote
part-time Posted January 28, 2014 Report Posted January 28, 2014 how do this setup run compared to 10mil cub Quote
sprinklerman Posted January 28, 2014 Report Posted January 28, 2014 How did setup run compared to 10mil cub how do this setup run compared to 10mil cub You had it right the first time....at least somewhat. Sent from my SCH-R970 using Tapatalk Quote
locogato11283 Posted January 28, 2014 Report Posted January 28, 2014 rick kiro, did the work on the cylinders this eli "big ends" old top end, and ya i can get some pics up. Do you mean Rick Cairo? Quote
dunerider787 Posted January 28, 2014 Author Report Posted January 28, 2014 Ya Tyler , didn't know how to spell it And 3.95s in the 300ft Quote
locogato11283 Posted January 28, 2014 Report Posted January 28, 2014 I can vouch for Rick's motors. I had a 4mm stock cylinder from him back in 2004. It ran very well. I doubt anyone will be disappointed in a set of cylinders ported by Rick. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.