Ridiculous Fabrications Posted January 10, 2014 Report Posted January 10, 2014 I hope I put this in the rite section. Anyway, I'm shortening some tie rods for a buddy for mine. They are the stock tie rods. I might just make new ones for him that will use the stock tie rod ends Anyone no offhand what size thread and pitch on a tap I would need? LH thread and pitch same as RH thread and pitch? Thanks guys Chris Quote
hoppedupandcutdown Posted January 10, 2014 Report Posted January 10, 2014 10mm x 1.25, same left and right. I just shorten the right side on mine, so i didn't have to find a left handed tap Quote
Ridiculous Fabrications Posted January 10, 2014 Author Report Posted January 10, 2014 Awesome thank you. I figured if I were to make a new set I would need both so I'll grab em tomarrow. Quote
hoppedupandcutdown Posted January 10, 2014 Report Posted January 10, 2014 You're welcome, also, uses a "S" drill, or an 11/32 it's only .00425" smaller. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.