Jrod324 Posted December 14, 2013 Report Share Posted December 14, 2013 (edited) K guys i just got my namura top end rebuild kit and need some help i know where some of these go like the water pump gasket and the small squares they for the reeds (right?) and the silver one is for the head... now my question is where do the rest go.. Edited December 14, 2013 by Jrod324 Quote Link to comment Share on other sites More sharing options...
mhoksch Posted December 14, 2013 Report Share Posted December 14, 2013 It would be a very good idea to buy a clymers manual. You won't regret it. They help you learn a lot and could end up saving yourself a lot of headaches Sent from my XT901 using Tapatalk now Free Quote Link to comment Share on other sites More sharing options...
Finch Posted December 14, 2013 Report Share Posted December 14, 2013 It would be a very good idea to buy a clymers manual. You won't regret it. They help you learn a lot and could end up saving yourself a lot of headaches Sent from my XT901 using Tapatalk now Free i agree theres a downloadable one i think in the tech section Quote Link to comment Share on other sites More sharing options...
killer454 Posted December 14, 2013 Report Share Posted December 14, 2013 I download all my manuals from tradebit.com 5-8 dollars instant download I have probably 20 manuals on my pc check it out take about 10 minutes and you will have it on your pc Quote Link to comment Share on other sites More sharing options...
edgehanger Posted December 14, 2013 Report Share Posted December 14, 2013 I've yet to figure out where those round paper gaskets go. Just an fyi...with the cheap namura paper gaskets you better hope you don't have to take it back apart to repair an air leak or anything because if you do those gaskets will probably rip to pieces. Next time spend the extra money to get cometic, its worth it. Quote Link to comment Share on other sites More sharing options...
Jrod324 Posted December 15, 2013 Author Report Share Posted December 15, 2013 Oh had no idea there was a diff thought it was all the same... Hopefully it last me for a bit Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted December 15, 2013 Report Share Posted December 15, 2013 Just coat all paper gaskets with a light layer of grease Between your fingers. They will last for years with taking the parts apart as the gaskets will not stick. Using the same clutch cover gasket and others for 4 years now on this one bike, taken off a bunch of times , still seals and doesn't stick. Just saying... Carry on. 1 Quote Link to comment Share on other sites More sharing options...
2strokeshees Posted December 15, 2013 Report Share Posted December 15, 2013 x2 I grease mine as well and it works pretty slick. You can download but Id pick up a hard copy of the manual. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.