New upgrades

[Jram2088]

So since my bike is currently taken apart thanks to a piston broken in half I'm thinking of doing a few upgrades

 

Currents mods

- 4 mill with small port

- 65 mm wiseco pistons

- CPI pipes

- uni air filters

- vforce reeds 3

- stock carbs

 

I currently have the 158 piston rods i believe, should I get the 5mm piston rod upgrade? And would that improve performance

 

Upgrades i wanna do since bike is taken apart

-wiseco 65.25 pistons

-40mm radiator

-advanced timing plate

- maybe 5mm piston rods

-stock carbs 330 jet, do I need to change the pilot?

 

Is it a yes or a no on the upgrades? And what's worth it and not worth?

 

http://m.ebay.com/itm/110876212596?nav=SEARCH&sbk=1

 

http://m.ebay.com/itm/121156501861?nav=SEARCH&sbk=1

 

Link to radiator and timing plate

[Banshee SE]

radiator looks good but will be better that you get a billet timing plate instead this one

[Jram2088]

radiator looks good but will be better that you get a billet timing plate instead this one

Thank you appreciate the help will start looking now

[sprinklerman]

If take a 10mm box end wrench and grind it a little thinner, you can adjust any timing plate without removing the flywheel.

[Strm Trpr]

You can adjust chariot timing plates without removing the flywheel, and they're a site sponsor.

http://m.ebay.com/itm/281104545763?nav=SEARCH&sbk=1

[bluebanshee98]

radiator is good. i bought one and so did my buddy. def worth the cash. chariot makes some nice stuff

[Jram2088]

You can adjust chariot timing plates without removing the flywheel, and they're a site sponsor.

http://m.ebay.com/itm/281104545763?nav=SEARCH&sbk=1

Thanks a lot I will be purchasing this one appreciate the help

[Jram2088]

Thank you all for the great help, any thoughts on the piston rods ?

[Jram2088]

Paid 220 today for both wiseco 65.25mm pistons, did i pay a fair price or did I get ripped of ?

[sprinklerman]

Paid 220 today for both wiseco 65.25mm pistons, did i pay a fair price or did I get ripped of ?

A little late for that now isn't it? Haha As long as you got what you needed , it's a good deal right?

[Starwriter]

Paid 220 today for both wiseco 65.25mm pistons, did i pay a fair price or did I get ripped of ?

 

As long as your bores clean up at 65.25.

 

I always let my builder supply my pistons. That way I always get the correct size and the builder get's to make a little extra profit.

[Jram2088]

A little late for that now isn't it? Haha As long as you got what you needed , it's a good deal right?

Haha ur totally right , but it's always good to find out anyways haha

[Jram2088]

As long as your bores clean up at 65.25.

 

I always let my builder supply my pistons. That way I always get the correct size and the builder get's to make a little extra profit.

Yea thats what I did my builder is taking care of the pistons he's the one that suggested to go with 65.25 since I have a 65 before n since I have to shave my head and bore out my cylinders because everything got damaged with the bad piston