Bansheedude350 Posted June 24, 2013 Report Share Posted June 24, 2013 It's not my wiring, it's a brand new. It seems to happen when a half full throttle, i take off my thumb of the throttle but it keep reving at the same rpm. It happened to me 2 times before, i cleaned my carbs both times and i was able to ride for 10h+ before to do it again. I have a TORS eliminator kit and fmf pipes. Quote Link to comment Share on other sites More sharing options...
Finch Posted June 24, 2013 Report Share Posted June 24, 2013 clean and lube cable and clean slides Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted June 24, 2013 Report Share Posted June 24, 2013 Sounds like its in the cable or the thumb assembly Quote Link to comment Share on other sites More sharing options...
jlaits Posted June 24, 2013 Report Share Posted June 24, 2013 Check the springs also. I had that happen twice at full throttle. The spring on the right carb wouldnt release. Quote Link to comment Share on other sites More sharing options...
Buckwheat Posted June 25, 2013 Report Share Posted June 25, 2013 An a one, an a two.... Quote Link to comment Share on other sites More sharing options...
cav4ever Posted June 28, 2013 Report Share Posted June 28, 2013 Make sure where the throttle cable goes from 1 into the 2 for the carbs is not binding up or pulled apart I had that issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.