Cylinder torque specs

[Vinny_Vincenzo408]

What are the torque specs for the cyclinders

[rg97]

Manual says 28 nM/ 20 ft. lbs for the head bolts AND the nuts thatgo on the  jug itself to connect to the crankcase

[Vinny_Vincenzo408]

Thanks

[SAVAGE420]

.....as said above, but go in sequence, hand tight,then 10 then 15 then 22....is what i do.

 

The sequence is on the stock head 1 thru 10

[Pastrykiller]

Turn it till it cracks then back off 1/2 turn.

Should be 20 ftlbs

[Jereme6655]

like savage says...

[BigRed350x]

Just wing it. Tighten them down until they strip out, then go backwards a half turn & your good to go.