airbox or splash guard

[SAVAGE420]

Sure!

[87sheerips]

 

This is the best. Made my morning.

[Vicstuff]

CFM airbox with pods and outerwears ftw.

 

Problem for op is he said he doesn't have the original airbox mounting tab

 

Sent from my HTC_Amaze_4G using Tapatalk 2

[Milktitties]

Sure!

 

 

Sure to my question?

[Scrubtherubber]

 

I run a 2-1 but this this has worked well for me

 

Sent from my HTC_Amaze_4G using Tapatalk 2

im working on making something along the same lines, did you use sheet metal or alluminum?

[Vicstuff]

This one is aluminum, I used 20 ga IIRC sheet metal on my old one and it worked fine I just painted it, but it does not work with my new pipes and battery set up so I made this one in about 30 minutes

 

Sent from my HTC_Amaze_4G using Tapatalk 2

[yoder]

I have been riding as is... I guess a good question is how "water resistant" are outerwears

[Vicstuff]

Not very lol

 

Sent from my HTC_Amaze_4G using Tapatalk 2

[J-Madd]

 

CFM airbox with pods and outerwears ftw.

Problem for op is he said he doesn't have the original airbox mounting tab

 

Sent from my HTC_Amaze_4G using Tapatalk 2

You can use zip ties. Don't have to have air box tabs.

[ATVridinMaNiAc]

Yea i actually dont use my airbox tabs with the CFM box i run.

[trav-99]

i also use a CFM alum. air box with twin k&n's. i ran open pods on my old banshee and water/mud was ALWAYS an issue and caused high maintance, sucked in water many times and eventually caused the throttle slides to start wearing and chipping off. never again will i run open filters. it really depends on where, and when you ride. in rainy wet pennsylvania you need extra protection. and outerwears didn't help either.