Think I got screwed

[06BCBANSHEE]

So I got my +2 stem from burgard about a mo th ago. Sold my bent stem for a 6 pack of beer. Anyways im pretty sure I got a stock length or maybe a plus 1"

 

I was going through some pics of +2 stems and mine doesnt look nearly as high. Can anyone verify this for me?

 

If they did I highly doubt they are gonna send me the right one. Their customer service sucks ass

 

 

 

[SandSlingerOR]

Yeah you got screwed. Actually your lucky you even got the stem in the first place, from what Ive read, some people have never even got their from burgard.

[06BCBANSHEE]

Ya i had a feeling it was a little short, but like u said they were such a bitch to deal with I didnt even wanna bother. Fuck!!

[06BCBANSHEE]

Is there any risers that will fit fat bars? Didnt wanna have to run risers but at this point, it is probably my only option

 

Feels great just wish it was a little taller for when i stand up.

[250rbanshee]

Yea you should be able to find some risers to fit it.

[06BCBANSHEE]

These are the only ones I have been able to find...if anyone knows of abetter brand or how these would work pls let me know. Or if there is a higher clamp I could use?

 

[Coupelx]

I have them on my motorcycle. Work alright.

[sheerider11]

I have a +2 that I would swap you. I have 2 sets of fat bar clamps as well.

My girlfriend isn't happy with it

[SAVAGE420]

Tusk

[ClayAiken]

OH! I got a riser i will sell you!

[06BCBANSHEE]

Sheerider11 i sent you a pm.

 

Those risers in that pic is hilarious.

 

DDQ i do not own a welder, or know where I could even get that done somewhere. Would hate to cut a brand new stem lol.

[06BCBANSHEE]

I know tusk makes good shit so I may look at those. I have never bought or traded from the forums. But sheerider11 has always given me good advice in the past.

[Azryll]

I just measure my stock one like you measured yours and I came up 22.5. Then I measure my +1 Roll design stem and it was about 24.5 (it was a little harder since its mounted on the bike, off 1/4" inch at most). So technically I think you did get a +2 but I have seen some on other peoples bike that are huge. If you still want it taller I seen a few companies that make taller clamps right on top of your stem so you don't have to put a riser on yours and make it look like a big chunky mess.

 

Such as http://www.ebay.com/itm/Universial-Tall-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/400448483360?pt=Motorcycles_Parts_Accessories&hash=item5d3c96f020 compaired to the stock size clamp http://www.ebay.com/itm/Black-Universial-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/200907351461?pt=Motorcycles_Parts_Accessories&hash=item2ec702e5a5. I've never used that company just trying to give ya some ideas instead of risers . Kind of depends what bars you get and how tall you want them

[06BCBANSHEE]

I just measure my stock one like you measured yours and I came up 22.5. Then I measure my +1 Roll design stem and it was about 24.5 (it was a little harder since its mounted on the bike, off 1/4" inch at most). So technically I think you did get a +2 but I have seen some on other peoples bike that are huge. If you still want it taller I seen a few companies that make taller clamps right on top of your stem so you don't have to put a riser on yours and make it look like a big chunky mess.

 

Such as http://www.ebay.com/itm/Universial-Tall-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/400448483360?pt=Motorcycles_Parts_Accessories&hash=item5d3c96f020 compaired to the stock size clamp http://www.ebay.com/itm/Black-Universial-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/200907351461?pt=Motorcycles_Parts_Accessories&hash=item2ec702e5a5. I've never used that company just trying to give ya some ideas instead of risers . Kind of depends what bars you get and how tall you want them

 

 

Hey thanks for measuring man, I really appreciate that.  Ya I was expecting to get something a little taller like most of the pics I seen.    Oh well thats what I get for cheeping out.  

 

the link you sent me is definitely what I would prefer over risers.  But with those its only gonna give me a 20mm rise over what I have now.  I think i need about 1 1/2''  

 

I love my bars,  they are super comfy and I like the bend,   so I dont want to get rid of them.

[sheerider11]

PM replied