Stator question

[crf250man]

Was taking my fly wheel off and bent a nob on my stator, think it will still work? Or should I get a new one?

[sheerider11]

How the hell did that happen?

[crf250man]

Lol first time taking one off and put a rod in the hole on the fly to hold it still. Now I know better but you think the stator will still work?

[sheerider11]

I'd throw the flywheel back on and see if it rubs. But I don't know, because when the magnets in the flywheel break up you get a lot of popping and misfires. So I don't know what a bent pole will do

[JayCLL]

i'd buy a new one personally

[HolySheet]

For the future a trick I use is to take a ratchet strap and wrap it around it. Then use a pair of vise grips to clamp the strap together real tight. Then it shouldn't turn.

[WINDYCITYJOHN400]

For an even better trick....spend the money on a clutch/flywheel tool.

[Pastrykiller]

And add an impact wrench to the list.

[East Coast ATV]

And some man hands

[sheerider1026]

And some cold beer. Bent stator pole = out of phase stator.. Junk it.

[crf250man]

I got the impact wrench already, looks like ill junk it and get a new one.

[crf250man]

Anyone have a good recommendation on a new stator?

[Nightmare]

Anyone have a good recommendation on a new stator?

OEM

 

Sent from my SGH-T679 using Tapatalk 2

[ATVridinMaNiAc]

A filter wrench works decent too, specially the rubber ones.

[trickedcarbine]

Filter wrench, good strap wrench, steel bar with two bolts threaded through it....... Just hotta think a minute and be smart from time to time