is this a lrgit port job or basment hack job

[BeeCanBanshee]

So I picked up these cyl's a while back cause mine were shit. The guy didn't know who ported them so I'm turningto you guys just wanna know what type of port this is if any, is a decent job and if they look Luke crap can it be reworked or is it to far gone.

 

http://s1311.beta.photobucket.com/user/lowery_3/library/

[fappy'97]

I see no pictures of cylinders in your Photobucket...  just clutch stuff

[Nightmare]

Link no worky

[BeeCanBanshee]

Damn it.I hate my phone. Stand by

[BeeCanBanshee]

http://s1311.beta.photobucket.com/user/lowery_3/media/flywheel/cylinders/IMAG0154_zpse25fae4a.jpg.html?sort=3&o=0#/user/lowery_3/media/flywheel/cylinders/IMAG0154_zpse25fae4a.jpg.html?sort=3&o=0&_suid=136098773150209927427507936954

[Nightmare]

Whatever it is, its probably better than i can do

[monster]

http://m1311.photobucket.com/albums/lowery_3?newest=1 Or just click on newest album at bottom of the page on last link. Looks like an ok trail / dune port. Need photos of transfer ports you also can measure from top of the cylinder to port tops this will also help.

[BeeCanBanshee]

Sorry for being a dumbass but.where are the transfer ports. Sides of cyl skirt on bottom?

[BeeCanBanshee]

And how.do you get accurate measurements? My Mic won't fit.in the cyl.

[#1JUANstunna]

A degree wheel is the proper way to measure.

[monster]

 

Sorry for being a dumbass but.where are the transfer ports. Sides of cyl skirt on bottom?

Yes! Here is a link with lots of port info hope it helps goggle it if you don't understand terms used.

[Larry's Shee]

no see linc monser

[dirtydownunder]

home job. cant really see the exhaust. should take it some where to check it out.

[trickedcarbine]

Definitely a beginner. They look OK though. Intake is just cleaned and knifed. Little exhaust work to. There is nothing wrong with them from the photos you had posted. There is definitely enough material to rework them and get more out of 'em if you want to.

[BeeCanBanshee]

Ok cool. Yea I started comparing mine to port job pictures I've seen around and they didn't look like any. Glad its decent and leaves room for more work.