banshee won't idle and back fires on low end

[chris banshee]

Ok so I just rebuilt top end good compression. Good squish. Good Leak down test. Rebuild built carbs and sync. Them the only thing I didnt do is get new reeds. Any suggestions. Please help

[chris banshee]

Oh yeah runs great on top end. And there is nothing fancy. Stock cylinders. No porting. Stock carbs. And fmf fattys.

[JAGeSage]

How are Reed Petals? Blocked pilot jet? Do you still have the Tors? Are they plugged in? Synced carbs?

[JAGeSage]

What method of Syncing was used on them i should say, didnt read the carb part

[chris banshee]

Not sure about reeds got new ones on the way. They are still the stock reeds just rebuit to day. Took them apart not clogged. But I am still running a 25 pilot. Going to get

A 27.5 and 30s tomorrow. Synced by looking and playing with them no sycn tool

[JUSTWANNARACE]

Make sure you have the slides in correct cut away to the filter side and that they are in the correct carb

[JAGeSage]

Slide side does matter on these ridiculously enough. But that doesnt match the lowend issue. maybe highend if he was having problems.. could be pilot, whats air set at

[chris banshee]

Yeah had that problem before with the slides. And yeah it was top end power. Thats what I was thinking mabye the pilot. 2 turns

[JAGeSage]

Stock pipes?

[HolySheet]

You had top end power issues with the slides facing the wrong way? Usually you get a rich condition if slides are wrong. Is the choke tube between the carbs?

[chris banshee]

No fmf fattys.

 

Holysheet....thats an old issue but yes choke tube is between the carbs.