stroked Posted January 13, 2013 Report Posted January 13, 2013 hey this summer started going to siver lake again doing some drag racing and i saw guys that loaded their quads on the back of the truck and drove out to drag strip. my question is what did you guys do to make that plat form. i didnt take the time to look at it but you had a plat form that was some how mounted to bed so you could get 2 quads in truck. just wondering how you did it. thanks in advance Quote
trickedcarbine Posted January 13, 2013 Report Posted January 13, 2013 They are snowmobile platforms, try looking up truck bed platforms. Quote
trickedcarbine Posted January 13, 2013 Report Posted January 13, 2013 http://www.google.com/search?q=snowmobile+truck+bed+rack&hl=en&client=safari&tbo=u&tbm=isch&source=univ&sa=X&ei=GjDyUKvlDKq60QHGg4DACA&ved=0CDEQsAQ&biw=480&bih=269#p=0 Quote
Stimbert Posted January 15, 2013 Report Posted January 15, 2013 Very simple. It's basically just a 8x8 table top on a 4x8 base.. Quote
badassbanshee479 Posted January 15, 2013 Report Posted January 15, 2013 i built mine out of plywood and 2x4s... then i strapped it down to the tie down hooks in the bed. also added eyelets to the deck so ya can tie the quads down Quote
421alkybanshee Posted February 1, 2013 Report Posted February 1, 2013 Yeah those setups I've seen SL are usually nice. I'm planning on building one myself for this summer. Are you guys driving down the highway with them loaded on top? Just wondering since that would save me a trailer pull! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.