awesomewrangler Posted December 5, 2012 Report Posted December 5, 2012 Guys, I need your help. I'm trying to locate a-arm bushing for chrome magnum a-arms. I bought these off a member here knowing the bushings were dry rotted from sitting. We both thought they took regular banshee bushings but they don't. The arms tubing diameter is thicker than a factory arm. Are there any sponsors here that are magnum dealers or know of any replacement bushings? Can anyone confirm the actual manufacturer of these arms? These arms are new and I can't wait to mount them but the bushings are junk. Please help. Quote
T_Shee Posted December 5, 2012 Report Posted December 5, 2012 I'm interested in this info also. I have looked before with no success. Hopefully someone else knows. Quote
Finch Posted December 6, 2012 Report Posted December 6, 2012 when i got some lsr arms i was told they took stockers but that was a no go i just sanded em down till it was a tight fit pounded them in and rode it. Quote
awesomewrangler Posted December 7, 2012 Author Report Posted December 7, 2012 I guess I could do that but I would think the stockers would be awfully thin. I saw somewhere on the net that mentioned burgard makes alot of arms for magnum so I shot them an email. Haven't heard anything back yet but I'll keep you posted when I do. If you guys have any other info please update this thread until we find an answer. Thanks again! Quote
springer Posted December 9, 2012 Report Posted December 9, 2012 if you don't have any luck finding any, let me know. i have some white delrin i could make you some with. Quote
Judge1 Posted December 9, 2012 Report Posted December 9, 2012 I guess I could do that but I would think the stockers would be awfully thin. I saw somewhere on the net that mentioned burgard makes alot of arms for magnum so I shot them an email. Haven't heard anything back yet but I'll keep you posted when I do. If you guys have any other info please update this thread until we find an answer. Thanks again! I had the same problem a while back. I gave up on trying to get a hold of burgard and went to a Nuts and Bolts with one a arm and found some bronze bushings. They have worked great no problem! Quote
T_Shee Posted December 23, 2012 Report Posted December 23, 2012 I guess I could do that but I would think the stockers would be awfully thin. I saw somewhere on the net that mentioned burgard makes alot of arms for magnum so I shot them an email. Haven't heard anything back yet but I'll keep you posted when I do. If you guys have any other info please update this thread until we find an answer. Thanks again! I had the same problem a while back. I gave up on trying to get a hold of burgard and went to a Nuts and Bolts with one a arm and found some bronze bushings. They have worked great no problem! That's a good idea Sent from my HTC PH39100 using Tapatalk 2 Quote
trickedcarbine Posted December 27, 2012 Report Posted December 27, 2012 Mike Teagan is the owner of Magnum and distributes it through his place magic http://www.dirt-deals.com/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.