Jump to content

still need help


scooter66

Recommended Posts

ok guys,,, iv done almost everything i could think of to try and get this thing to take fuel good,,but im still having to choke it then i can let it rip,,, but it will idle now,,,it was that little switch in the thumb throttle that runs the tops but all thats gone now

Link to comment
Share on other sites

ok,,sorry bout the lack of info,,my shee would not idle but i found the problem to that,,it was the switch in the thumb throttle,,,but i still have to choke it to get the right side to take fuel,,it is real sluggesh when u first hit the gas,,but once u get it to open,,it hang on,,,its almost like it is not getting the fuel the left side is until your about a quarter throttle. it is 60 over, ported, head shaved carbon fiber v-force reeds, reed spacers,,all toomey jets and and needles,,timing set to 4+,,jets are 270 and im at 1480 elevation,,, thanx for all and any help

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...