marcboy62 Posted April 20, 2012 Report Posted April 20, 2012 I just want to know if its possible to put a 250r frame on a banshee and if it needs a lot of mods to do it if it requires it thank you!! Quote
Infamous039 Posted April 20, 2012 Report Posted April 20, 2012 Do you mean put a Banshee motor into a 250r Frame ??? If this is your question, Im sure it can be done with some modification to motor mounts. Quote
RiDeTRIKES250R Posted April 20, 2012 Report Posted April 20, 2012 putting a 250r frame on a banshee is not hard....... fitting a banshee engine inside of a 250R frame requires work... .lots of work... but it can be done.... 88-89's are easier to do, but by easier I mean it still gonna take your 40+ hrs to do it and make it look nice. Quote
Matt21 Posted April 20, 2012 Report Posted April 20, 2012 Are we talking about a Lonestar drag chassis or a Lonestar mx type chassis??? Quote
marcboy62 Posted April 21, 2012 Author Report Posted April 21, 2012 An mx frame and i want to make my banshee more balanced a'd i heard that the 250r frames are good ones.. Quote
Dahl87banshee Posted April 21, 2012 Report Posted April 21, 2012 An mx frame and i want to make my banshee more balanced a'd i heard that the 250r frames are good ones.. Did my buddy rattle can ray tell you that? Quote
So Cal Suspension Posted April 23, 2012 Report Posted April 23, 2012 The 250R frame was a good frame, back in the late 90's, until about 2004 when the YFZ450's came out in 2004. Ever since then, the 250r geometry has been outdated, and rudimentary. If you REALLY want a well handling banshee for MX, and want to do an abortion bike, either do a TRX or YFZ-R frame. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.