My Banshee Makeover

[AllStarBanshee007]

Stripper her down, put some new shoes on her and a new skirt on..... watcha think?

 

http://i1246.photobucket.com/albums/gg613/allstarbanshee007/photo8.jpg

[troyzstang]

Before pic please.

Is this the $1,500 dollar bike?

[Infamous039]

Looks great

[locogato11283]

[AllStarBanshee007]

Yes this was the 1500.00 bike....cleaned it up a bit...didnt care for the blue (plus the plastics were all f... up.

new plastics

rims

tires

handlebars

etc.

Before pic please.

Is this the $1,500 dollar bike?

[AllStarBanshee007]

is there any markings on carbs to determine what size they are? I clearly can see that there KLEIN aftermarket carbs ...any ideas

 

http://i1246.photobucket.com/albums/gg613/allstarbanshee007/photo1.jpg

 

 

already spent around $850.00 on the changes but it needed it

[troyzstang]

Bike looks really clean. Didn't take long to start busting up that wallet. Money well spent.

Are you going to let Jeff design a new seat cover for it?

 

Troy

[AllStarBanshee007]

ps sorry didnt realize i was posting in the conversion section- but while i'm here i have another question- the seat on the bike is loose ...it latches although the front of the seat (near the gas tank) wiggles quite a bit. I noticed that the plastic on the seat that goes under the frame to hold it in place there is a major gap preventing it to hold tight....is there supposed to be a rubber spacer to hold it in place? anyone ever have this problem?

[troyzstang]

my junk does the same thing.

[camatv]

replace the rubber nubbies on the seat pan then you have to watch them really close to keep them from poping out. OR beat the seat loop down a lil bit and ghetto rig it up oh and now you cannot say this is a 1500 dolla build!

[AllStarBanshee007]

where can i find these seat nubbies?

 

ps...never said it was a 1500.00 build ...I said i bought it for 1500.00

 

Thanks

 

replace the rubber nubbies on the seat pan then you have to watch them really close to keep them from poping out. OR beat the seat loop down a lil bit and ghetto rig it up oh and now you cannot say this is a 1500 dolla build!

[Nightmare]

i like it

[shakar]

kinda ghetto but i had the jiggley seat. i jus wraped a small towell around the bar the seat slides on.it works perfect and best of all if i ever have an emergecy i dont have to use one of my socks.....again..........lol goodluck

Edited April 22, 2012 by shakar

[locogato11283]

To fix the seat all you have to do is take a hammer and whack the front piece a couple times. I've done that to every Banshee I've ever had.

[sdatver]

What kind of front bumper is that?