JoeStar85 Posted April 16, 2012 Report Posted April 16, 2012 I pulled all the bolts around the cylinders. The cylinder heads will not pull off the motor. Any tips on gettin them loose? I was thinking I should put some heat to it. Quote
zach45 Posted April 16, 2012 Report Posted April 16, 2012 Put the plugs back on and kick the motor over Quote
Paul M Posted April 16, 2012 Report Posted April 16, 2012 Tap the cylinders with a rubber mallet they will come loose . Quote
ginger Posted April 16, 2012 Report Posted April 16, 2012 i assume you pulled the hose off the back of the head right Quote
JoeStar85 Posted April 17, 2012 Author Report Posted April 17, 2012 I got the head off. I was saying that the cylinders wont pull off the from the motor. My bad, I worded my question wrong Quote
zach45 Posted April 17, 2012 Report Posted April 17, 2012 rubber mallet and wiggle wiggle wiggle Quote
SpecialEd 05 Posted April 17, 2012 Report Posted April 17, 2012 rubber mallet and wiggle wiggle wiggle +1, that's what I did and it worked for me... Quote
JoeStar85 Posted April 18, 2012 Author Report Posted April 18, 2012 I got them off....they were stuck on there good though! Quote
ticktock Posted April 18, 2012 Report Posted April 18, 2012 Those base gaskets were sealed well! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.