LawDog Posted March 31, 2012 Report Posted March 31, 2012 okay so im still very new to working on banshee motors. so again im reaching out to you guys. have 03 banshee, coolhead,t5s, vforce 3 reeds, no tors and k&n air filter, i run 93 octane fuel. i moddified the stock air box, no top and i cut the bottom out of it. im going to pods when i do my 4mil motor later in the year. i ride at 500-1200 above sea level and need to re jet it and rebuild the stock carbs. i need to pick up some jets and i just wanted to know which ones i should get from what range. i know its a test which one works the best and just mess with it tell it runs right. so i just want to know what jets to get to start working on it. sorry im a noob Quote
LawDog Posted March 31, 2012 Author Report Posted March 31, 2012 What pipes or any porting? toomey t5s, and on the port i dont know if so its not much of one. Quote
Larry's Shee Posted March 31, 2012 Report Posted March 31, 2012 Start 310-300m, 27.5p, 1 1/2 turns, middle clip and work from there. Always start rich and work down. Plug chop or good read if capable. Quote
LawDog Posted March 31, 2012 Author Report Posted March 31, 2012 k what would be the the other sizes Quote
slothman Posted April 2, 2012 Report Posted April 2, 2012 k what would be the the other sizes 270-310 is a good start & 27.5 pilot Quote
LawDog Posted April 5, 2012 Author Report Posted April 5, 2012 270-310 is a good start & 27.5 pilot thanks man Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.