Jump to content

Recommended Posts

Posted

The more air and fuel you feed the motor, the more power it will put it out. Simple logic my man, Now go order some pods, outerwears, and jets.

Posted (edited)

260? I would guess those are too small to begin with. What is your in take setup now? Lid, k&n? With the lid off and a k&n I don't think there is much to gain at all. I've switch to pods from an open air box and k&n and changed 1 jet size. I would think a pro flow kit with no lid could flow as much as pods. May be my next setup since I traill ride. main question is where do you ride and how.

Edited by 2004LEBanshee
Posted

Im going to disagree with you gaining anything at all with the level of mods you have now...or will likely have in the future,,short of a all out drag bike. If your airbox has the lid removed,and you run a K&N with a proflo adapter,you will be making the same if not MORE hp& tq. I have seen more than one 70-75 hp 4mil running a K&N with an airbox. I really think the longer intake tract length of the stock airbox helps get a better signal thru the carbs.

Posted

You gain 15 min by not having to mess with all that airbox crap to get to your carbs to rejet or maintain.

 

Now that's a true gain with removing the airbox! :notworthy: although i think 15 minutes is a bit of an exaggeration ,the point is valid.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...