shanYE west Posted February 23, 2012 Report Share Posted February 23, 2012 800HP? Someone misinformed you. I have 900. 900HP Hampster power? Quote Link to comment Share on other sites More sharing options...
87sheerips Posted February 27, 2012 Author Report Share Posted February 27, 2012 Aluminum version of this peg will be complete this week! Stay tuned They are SUPER light Quote Link to comment Share on other sites More sharing options...
87sheerips Posted February 28, 2012 Author Report Share Posted February 28, 2012 Example of stock nerfs being used with the new pegs! Many aftemarket nerfs bolt here as well, so they will work too Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted February 28, 2012 Report Share Posted February 28, 2012 Excellent peg design. These are so bad ass. Can you do a set moved back centered over the bolt holes? Is the kick start stop really necessary? If the stop is omitted, will the kick start over rotate and break anything relating to the mechanism, or your shin? I don't use Nerf Bars, so that's not a problem, so the holes could be omitted. Is the Metallic Silver similar to the OE Silver Frame Color? LMK Quote Link to comment Share on other sites More sharing options...
87sheerips Posted February 29, 2012 Author Report Share Posted February 29, 2012 Hey thanks for the props bud. I can make you a custom set in any position. The kicker stop is an OEM feature that i find useful and chose to include into the design. The design is intended to work for any application. By themselves or with nerfs. The metallic silver is pretty close to stock frame, yes. Maybe a bit more metallic. I have one set ready to ship that is gloss black. I also have an aluminum set that will be done this week as well! Aluminum pegs will be $125 shipped for the set. Let me know! Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted February 29, 2012 Report Share Posted February 29, 2012 I'll take it to PM's. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 29, 2012 Report Share Posted February 29, 2012 Kicker stop is not necessary and I actually prefer not having it, especially on my 10 and 18 DMs. Both of my bikes have the stainless Roll pegs with no kicker stop. You will be fine without it. Quote Link to comment Share on other sites More sharing options...
87sheerips Posted February 29, 2012 Author Report Share Posted February 29, 2012 I've never even seen a kicker stop? Or even looked but I've never had stock pegs or heel guards. It is a feature on the stock pegs....Not all NEEDED but I think it is just a nice feature to have on most Banshee's I can make these pegs without the kicker stop if that's how you want them upon ordering Anything is possible! Quote Link to comment Share on other sites More sharing options...
87sheerips Posted March 7, 2012 Author Report Share Posted March 7, 2012 Aluminum pegs NOW AVAILABLE!!! $150 shipped Just to show the weight differences: Stockers 3lb 6oz Steel JDS pegs 5lb 1oz (1.7 lbs heavier than stock) Aluminum JDS pegs 1lb 13 oz (1.6 lbs LIGHTER than stock! or 3.25 lbs LIGHTER than steel JDS) Quote Link to comment Share on other sites More sharing options...
94BANSHEE Posted March 9, 2012 Report Share Posted March 9, 2012 Hi again!! Just curiosu, would AC nerfs work with these? I have AC nerfs currently bolted up to my stock pegs. Are bolt holes for the nerfs on the pegs lined up the exact same? Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted March 9, 2012 Report Share Posted March 9, 2012 (edited) Hi again!! Just curiosu, would AC nerfs work with these? I have AC nerfs currently bolted up to my stock pegs. Are bolt holes for the nerfs on the pegs lined up the exact same? Refer to post #18. http://bansheehq.com/forums/index.php?showtopic=152059&view=findpost&p=1316674 If your AC Nerfs bolt up like stock, then there you go. Edited March 9, 2012 by Strm Trpr Quote Link to comment Share on other sites More sharing options...
87sheerips Posted March 10, 2012 Author Report Share Posted March 10, 2012 Refer to post #18. http://bansheehq.com/forums/index.php?showtopic=152059&view=findpost&p=1316674 If your AC Nerfs bolt up like stock, then there you go. Yes, the holes are exaclty the same as stock pegs. Stock nerfs and aftermarket nerfs that utilize those holes will work!!! Sold one set of steel and one set of Aluminum so far.... Looking forward to hear some feedback on them. I have the steel pegs on my girls shee, and they are very solid Quote Link to comment Share on other sites More sharing options...
94BANSHEE Posted March 11, 2012 Report Share Posted March 11, 2012 Ready to order a set! Just a quick question, now regarding the painted finish on them, would the paint hold up better on steel or aluminum, or doesnt really make much of a difference? Quote Link to comment Share on other sites More sharing options...
87sheerips Posted March 12, 2012 Author Report Share Posted March 12, 2012 Ready to order a set! Just a quick question, now regarding the painted finish on them, would the paint hold up better on steel or aluminum, or doesnt really make much of a difference? Doesnt make a difference, should hold up well on either! Quote Link to comment Share on other sites More sharing options...
94BANSHEE Posted March 12, 2012 Report Share Posted March 12, 2012 (edited) Payment sent for one set of aluminum metallic silver pegs!! John, please check your PM for shipping details thx Edited March 12, 2012 by 94BANSHEE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.