plug chop photos

[chetgoff]

 

 

 

 

 

My mods are...Stock stroke 64.5 bore, head milled .20 drag ported by wildcard. Cases port matched, plus 4 timing, 35mm Pwk CEL needle 58 pilots and 162 mains. No bog on bottom and this thing ran real good. This was new plugs 6th wide open and turned bike off, held clutch open, and throttle wide open. Oh almost forgot Sheares inframe small bore. and Pods for filters

Edited February 10, 2012 by chetgoff

[chetgoff]

looking for help here do these look lean? or good.

[J.J.]

Those are good in my opinion, to me it's the width of the soot ring that matters, not the color so much.

[chetgoff]

thanks for the reply. No other opinions?

[vulvafan537240]

looks good to me. whats your elevation? sounds like a big pilot but the plugs look good.

[chetgoff]

elevation is 950'

[BUILDER]

Looks like another set of wasted plugs to me!!

[lms1977]

if you use a eye loop you can see down in there great with out cutting, but on the trail I just look in there with my eye and you can tell if it has a smoke ring and approx. the width

[EvilBanshee]

Plugs look good. YOu want a very small soot ring.