Thom6069 Posted October 14, 2011 Report Posted October 14, 2011 Bought a box of banshee parts from a guy and in it were these two stators; the one on the right looks like the stock one on my banshee, the one on the left has much larger windings... Does this mean it is higher output than the other, if so how do I know what it is? The only markings on these is on the back of the timing plate where it says " Japan". Both timing plates have this same marking. There is nothing on either stator... Quote
camatv Posted October 14, 2011 Report Posted October 14, 2011 yea and one of them has the ground disconected... Quote
gotta_goatsfast Posted October 14, 2011 Report Posted October 14, 2011 The left one I believe is a MOOSE stator. I've got one exactly like it for a few years now. The Moose one has yellow insulation where all the Ricky's I've seen have white (unless Ricky used to use yellow?) Right one is stock. Quote
gotta_goatsfast Posted October 14, 2011 Report Posted October 14, 2011 Moose and Ricky one and the same? Quote
Thom6069 Posted October 14, 2011 Author Report Posted October 14, 2011 ya the ricky stator, and the stock one is mounted on a modded timing plate looks like for +4. Guessin thats why the mounting holes on the timing plate are wallored out? Quote
jbooker82 Posted October 14, 2011 Report Posted October 14, 2011 looks just like my ricky stator Looks like it has a heavier coat of clear sealant than any ricky stator I have had. The ricky stators I had looked like they were just dipped in a real thin coat of varnish, where his has a real heavy build up. Almost like clear silicone. Quote
Ricky Stator Posted October 14, 2011 Report Posted October 14, 2011 Looks like it has a heavier coat of clear sealant than any ricky stator I have had. The ricky stators I had looked like they were just dipped in a real thin coat of varnish, where his has a real heavy build up. Almost like clear silicone. The one a left could be a Moose/Electrosprort/RM Stator. And yes they very close to one of our stators, as these companies have copied our design. Over the last few years we have made some upgrades to our stator as to set ourselves apart form the these other companies.. Quote
Thom6069 Posted October 14, 2011 Author Report Posted October 14, 2011 mine was sent to gary to have it rewound with thicker gauge copper before the thin shit fell apart and he floated my ground. Floated the ground? Ive heard this term before but never have known what it means, enlighten me... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.