Ricky Stator

Whats your name so I can look into what happen?

Are they Ricky Stator parts?

We havent offered a flywheel for about two years, any new flywheel didnt come from us.

Thanks for the input. We have learned over the years there are a certain amount of Banshees that will not run right with the 200 watt stator. The 200 watt stator is completely different from the OEM or our stock output stator in regards to how the ignition circuit is wound and configured. Most Banshee will run fine with the change in the ignition winding, however there is a small percentage that wont. We have recognized this and come up with a solution for most customers. With HID and LEDs becoming so popular the need for 200 watts is not as great as it use to be. We now have a 130 watt stator that is wound identical to the OEM one to eliminate any high speed misses.

We have been in business for over 20 years, so to say we have pushed junk into the market is totally false. Did we have issues with some of our Banshee products, ABSOLUTELY! We do not have a problem admitting there were problems in the past. One thing we are sure of is that anyone that encountered problems with our parts was taken care of, if they werent then they did not give us the chance to make it right and those are the facts. In regards to the changes to the stators for example: Stators are now assembled here in house, the quality of the wire is the best available, hardware is from the USA and each stator is tested before shipping. We didnt join this forum to try and create more business for ourselves but to mainly support our products and clear up any misconceptions about us that are still out there. I can tell just from today there is a tough crowd here.

We have always taken care or our customers. Not sure you have ever dealt with us based on your statement. Email me your name and I will see when and what you bought and yes we will see about taking care of it. mike@rickystator.com

We are new to the forum Starwriter.

Hello Everyone We are new here to the forum. After reading through some topics I see many people have nothing but negative feedback in regards to our parts. We have worked hard over the last few years to separate ourselves from the "other" stator companies. If there is anyone out there that we didnt take care of let us know, we would be glad to help. We have changed all the features of our stators that many people are still reporting as issues with our parts, this is just not the case. As a reminder we still offer the rewind of the OEM stators. Also if there is any technical assistance we can offer let me know.

Hello Everyone We are new here to the forum. After reading through some topics I see many people have nothing but negative feedback in regards to our parts. We have worked hard over the last few years to separate ourselves from the "other" stator companies. If there is anyone out there that we didnt take care of let us know, we would be glad to help. We have changed all the features of our stators that many people are still reporting as issues with our parts, this is just not the case. As a reminder we still offer the rewind of the OEM stators. Also if there is any technical assistance we can offer let me know.

Did you have an issue with one of ours we didnt take care of?

Keep in mind the yamaha service manual has a misprint on how to test the ignition coil.

Have you had problems with our stators?

Typical of the way RM stator does business. They copied several of our stator designs and did a piss poor job of it too.

The one a left could be a Moose/Electrosprort/RM Stator. And yes they very close to one of our stators, as these companies have copied our design. Over the last few years we have made some upgrades to our stator as to set ourselves apart form the these other companies..

Did you have some problems with Ricky Stator parts?